+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: How to Coding Digital Speedometer in G30 (/showthread.php?tid=123045)
How to Coding Digital Speedometer in G30 - sra - 19-09-2026
How to Coding Digital Speedometer in G30 ID6 by ё5у5
please tell me the parameter to coding in dkombi
1.digital speedo
2.KM/H
Many Thank
RE: How to Coding Digital Speedometer in G30 - hansw0rst - 19-09-2026
⚬ Target ECU: DKOMBI2 (or DKOMBI)
⚬ Folder: 3000 Anzeige_Konfiguration
⚬ Primary Parameter: DIGIT_GESCHW_ENABLE
⚬ Set to: anzeige_kmh (forces km/h) or anzeige_akt_pia (links unit to iDrive settings)
⚬ BC Cycle Parameter (if applicable): CB_DIGITAL_GESCHWINDIGKEIT -> set to aktiv
⚬ Speed Buffer (Optional): DIGIT_GESCHW_VERKEHRSRECHTLICH
⚬ aktiv = factory speedometer buffer (+3–5 km/h)
⚬ nicht_aktiv = true/uncorrected speed
⚬ ё_5у5 Target: S15A (connect via VIN using ENET)
⚬ Vehicle State: Triple-press start button without brake to enter dїдgиo5тїc Mode
⚬ Flash Type: Click Code FDL only (never press "Code" directly on the ECU)
RE: How to Coding Digital Speedometer in G30 - sra - 19-09-2026
(19-09-2026, 09:37 AM)hansw0rst Wrote: ⚬ Target ECU: DKOMBI2 (or DKOMBI)
⚬ Folder: 3000 Anzeige_Konfiguration
⚬ Primary Parameter: DIGIT_GESCHW_ENABLE
⚬ Set to: anzeige_kmh (forces km/h) or anzeige_akt_pia (links unit to iDrive settings)
⚬ BC Cycle Parameter (if applicable): CB_DIGITAL_GESCHWINDIGKEIT $\rightarrow$ set to aktiv
⚬ Speed Buffer (Optional): DIGIT_GESCHW_VERKEHRSRECHTLICH
⚬ aktiv = factory speedometer buffer (+3–5 km/h)
⚬ nicht_aktiv = true/uncorrected speed
⚬ ё_5у5 Target: S15A (connect via VIN using ENET)
⚬ Vehicle State: Triple-press start button without brake to enter dїдgиo5тїc Mode
⚬ Flash Type: Click Code FDL only (never press "Code" directly on the ECU)
Thankkk