Solved ✔ Volvo V50 2006 edc16C31 problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: Solved ✔ Volvo V50 2006 edc16C31 problem (/showthread.php?tid=12866) Pages:
1
2
|
Volvo V50 2006 edc16C31 problem - DjRomeo - 21-01-2016 Hello, i have problem with volvo V50 2006 year edc16C31 wanna turn off dpf . I try read with galleto V54,mpps and other tools i think read good but very fast 1sec :/ and file readed, but problem is i turn off dpf and try write in file again ,but can't all tools say what can't i try search bdm or somethink but can't find any info . Maybe some one can give me edc6C31 pin out were is K/+/- pin's maybe i do somethink wrong. Thank you all for help. RE: Volvo V50 2006 edc16C31 problem - enigmacar - 21-01-2016 BDM best solution RE: Volvo V50 2006 edc16C31 problem - DjRomeo - 21-01-2016 Could you show me bdm soldering manual with galeto,bdm100 or other tool ? thank you. RE: Volvo V50 2006 edc16C31 problem - mike_service - 21-01-2016 This kind of ecu can be read by K-line on the bench !are easy job ! The problem are for dpf off file,if not are correct will go in limp mode in next 5 km RE: Volvo V50 2006 edc16C31 problem - DjRomeo - 22-01-2016 (21-01-2016, 22:07 PM)mike_service Wrote: This kind of ecu can be read by K-line on the bench !are easy job ! I try all tools ,but can't normal read and write file ,when i try on bench write all tools say: WRITING ECU Writing Initialization...File not recognized, send file to technical support. I asking for help how need connect by K-line ore bdm pinout's with what tools :/ RE: Volvo V50 2006 edc16C31 problem - PhilipM - 23-01-2016 Have you seen the pinout picture for VOLVO EDC16C31 in FGTech\DOCUMENTS\PIN_OUT_ECUS\ ? RE: Volvo V50 2006 edc16C31 problem - DjRomeo - 23-01-2016 (23-01-2016, 00:42 AM)PhilipM Wrote: Have you seen the pinout picture for VOLVO EDC16C31 in FGTech\DOCUMENTS\PIN_OUT_ECUS\ ? yes i look , i try with fgtech with europe version ,with chine clone , mpps, galleto1260 ..... and all can only - READ I CANT'T >>>WRITE<<<< . RE: Volvo V50 2006 edc16C31 problem - mike_service - 23-01-2016 Hi IO Terminal can read/write such ecu,FGTech can do it,CMD can do it...and many other tools ! RE: Volvo V50 2006 edc16C31 problem - DjRomeo - 23-01-2016 Yes all people say same all tools can do it....... but i try 3-4 tools and all same can only read , maybe ecu are locked ore somethink ? why imposible in this ecu write anythink :/ RE: Volvo V50 2006 edc16C31 problem - PhilipM - 23-01-2016 I think I had problems with one of these too, so I just opened it and used BDM before I pulled my hair out! |