OBD carprog - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13) +--- Thread: OBD carprog (/showthread.php?tid=1308) |
OBD carprog - zeca - 29-12-2013 Hi can someone teach me step by step how to clear crash data, clio airbag bosch, through obd CARPROG v4.01 thank you RE: OBD carprog - daniersms - 29-12-2013 (29-12-2013, 13:59 PM)zeca Wrote: Hi Firstly you must see what control unit is in this Clio and then you can go into the Carprog prog to see if that specific control unit is supported by Carprog.If you find it there they will tell you if you need to remove the IC and what IC to look for and maybe you can use the pins on the plug to read and write the file so actually you can follow the instructions and you should be ok-Good luck (29-12-2013, 13:59 PM)zeca Wrote: Hi Firstly you must see what control unit is in this Clio and then you can go into the Carprog prog to see if that specific control unit is supported by Carprog.If you find it there they will tell you if you need to remove the IC and what IC to look for and maybe you can use the pins on the plug to read and write the file so actually you can follow the instructions and you should be ok-Good luck RE: OBD carprog - ghaninovski - 29-12-2013 Hello once you plug the plug obd read successive message in case the dump does not crash tests to pass the dump in another program such car tool to treat then do the flash Note: there are interfaces carprog Chinese manufacturing did not work well, you may consider as a means of reading and writing by the treatment against the dump it is done with other software RE: OBD carprog - meroteki - 29-12-2013 This member ask in some forums when reply he no put thanks this no like persons help in forums bad bad bad RE: OBD carprog - pictorino - 30-12-2013 Realy, why did you bought your CarProg? Just like that, or...?... First of all, do as collegue daniersms wrote. Even, you could look better on the internet: http://www.youtube.com/watch?v=F-RQ192DCYg If you do this for you, is ok. Otherwise, if you have the client near..., Good luck anyway! RE: OBD carprog - meroteki - 30-12-2013 Zeca you carprog no its original no work in obd find unit airbag in this car its es asy to remove is near knock gear box in down car open unit finf one eepron 95080 number or 95060 open you carprog put soic clip blue color little clip in down corner when you tead numbers and brand ok put in left cable rojo and read only this put file here i return whitout crash RE: OBD carprog - zeca - 07-01-2014 (30-12-2013, 06:36 AM)meroteki Wrote: Zeca you carprog no its original no work in obd problem solved with adapter A15 thank you all RE: OBD carprog - NewKidInTown - 30-01-2014 Can i run carprog on win 7 64bit thanx |