CarTechnoloGY
Ford fiests 2006 1.6 tdci sync - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Ford fiests 2006 1.6 tdci sync (/showthread.php?tid=13601)



Ford fiests 2006 1.6 tdci sync - exbebras - 25-02-2016

After starting with booster the immo gone. Trouble code in the pcm p1259. I have tryed to make synchro with Ids no sucess. MAybe aomebody have pcm eeprom 95160 bosch 0281011612 6S61-12A650-VC?


RE: Ford fiests 2006 1.6 tdci sync - elektro128 - 25-02-2016

Spi
0281011612


RE: Ford fiests 2006 1.6 tdci sync - exbebras - 26-02-2016

Tryed with this dump but the same no synchro after trying with ids


RE: Ford fiests 2006 1.6 tdci sync - exbebras - 26-02-2016

Is it possible to make synchro in the dash and engine dump on the table?


RE: Ford fiests 2006 1.6 tdci sync - bara001 - 26-02-2016

(26-02-2016, 19:27 PM)exbebras Wrote:  Is it possible to make synchro in the dash and engine dump on the table?

no you cant. but with vcm ids you can.


RE: Ford fiests 2006 1.6 tdci sync - exbebras - 26-02-2016

I have vcm ids, i clear keys , write keys , try initialization but still trouble code in the pcm p1259 and car wont start


RE: Ford fiests 2006 1.6 tdci sync - racin-snake - 27-02-2016

Have you tried the fuses behind glove box ? check all 3 amp fuses first you may be quicker HTH


RE: Ford fiests 2006 1.6 tdci sync - exbebras - 27-02-2016

Yes i have checked everything , maybe problem in cluster? Because firs it was not possible to generate outcode from ecu, with ids i updated software in the ecu and after it was possible to generate outcode


RE: Ford fiests 2006 1.6 tdci sync - exbebras - 01-03-2016

Tryed to change another cluster but the same after initialization in the pcm p1259 Data mismatch (received data does not match what was expected). Security messages do not match between PCM and instrument cluster, vehicle does not start, something wrong in pcm:/