+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Zed bull problem (/showthread.php?tid=1386)
Pages:
1
2
Zed bull problem - loki954 - 02-01-2014
My zed bull work fine till now, afer start it gives an "antena error" everithing on th HW is fine, so i figured out to try to change the software in the atmega. Anyone have the dump i search a lot but i cant find it
RE: Zed bull problem - asto - 02-01-2014
Checked rele K1 and ic U6,transistor Q1
RE: Zed bull problem - loki954 - 02-01-2014
All ok, it is left only to reflash the atmega
RE: Zed bull problem - pkwan88888 - 15-01-2014
Hi Sir,
My Zed bull has problem With turn on and show DS Error, Error 1.
Any one have update files.
Please help!
Thanks.
RE: Zed bull problem - adrianus - 28-02-2014
(15-01-2014, 22:09 PM)pkwan88888 Wrote: Hi Sir,
My Zed bull has problem With turn on and show DS Error, Error 1.
Any one have update files.
Please help!
Thanks.
Hello, my mini zed bull clon have the same problem but the error is 4.
Help please!!!
RE: Zed bull problem - oxero - 26-03-2014
(28-02-2014, 19:30 PM)adrianus Wrote:(15-01-2014, 22:09 PM)pkwan88888 Wrote: Hi Sir,
My Zed bull has problem With turn on and show DS Error, Error 1.
Any one have update files.
Please help!
Thanks.
Hello, my mini zed bull clon have the same problem but the error is 4.
Help please!!!
Hello friends ,my mini Zedbull can't connect to pc (device not responding), has an internal error on the Mini Zedbull when turn on the power, screen out the words "internal error please contact your seller" ,how to solve this problem?
RE: Zed bull problem - ricky661 - 17-04-2014
For those who has issues with their Zed bull especially the mini version. Replace the 2 voltage regulator part number L7805CV. They are the main components that causes most of the errors described. The reason is because they operate really hot and does not have heatsink or ventilation. You can easily check with a touch of your fingers. If they are bad within a minute or two, it will be really hot to the touch. You don't have to worry about replacing the 2 tantalum capacitors next to it. When they go bad no display on the zedbull lcd.
Hope this help.
RE: Zed bull problem - da14u - 17-04-2014
(15-01-2014, 22:09 PM)pkwan88888 Wrote: Hi Sir,
My Zed bull has problem With turn on and show DS Error, Error 1.
Any one have update files.
Please help!
Thanks.
Welcome to the forum
It is clearly said to INTRODUCE YOURSELF (MANDATORY) DO NOT SKIP.
Your first post should be here:
http://garage-automotive.com/showthread.php?tid=7
RE: Zed bull problem - da14u - 18-04-2014
(28-02-2014, 19:30 PM)adrianus Wrote:(15-01-2014, 22:09 PM)pkwan88888 Wrote: Hi Sir,
My Zed bull has problem With turn on and show DS Error, Error 1.
Any one have update files.
Please help!
Thanks.
Hello, my mini zed bull clon have the same problem but the error is 4.
Help please!!!
Welcome to the forum
It is clearly said to INTRODUCE YOURSELF (MANDATORY) DO NOT SKIP.
Your first post should be here:
http://garage-automotive.com/showthread.php?tid=7
RE: Zed bull problem - raffy haddad - 04-11-2015
Hi all
i have mini zedbull that ws working just great with effi and today when i tryed to conect it the effi it shows comport but device is not responding
i disconect it from pc and tryed to read transponder and copy transponder it worked just fine without the pc
i redownload the ftdi vcp software but still same probleme
any one can advise ?
thanks all in advance