![]() |
Peugeot dcu 102 problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Peugeot dcu 102 problem (/showthread.php?tid=14139) |
Peugeot dcu 102 problem - junnnior - 17-03-2016 Hi i have peugeot boxer 2.2 hdi visteon dcu 102 on the table k-tag read no problem when connected to a car ecu fails to communicate, the "check engine" light only blinks once some solution thanks RE: Peugeot dcu 102 problem - autoscan7 - 17-03-2016 (17-03-2016, 17:20 PM)junnnior Wrote: Hi may be cheksum! try with winols RE: Peugeot dcu 102 problem - xander20005 - 17-03-2016 Check the wires on car. remove exterior fusebox and between sockets under box and ecu socket RE: Peugeot dcu 102 problem - junnnior - 18-03-2016 Hi checksum ok I counted fuses or not because I was putting into another car and the same RE: Peugeot dcu 102 problem - fodortms - 20-03-2016 Hi Try to pressing the borad and after add on ignition I repaired more ecu with same trouble. It was soldering problem with all. But you be very carefull, when remove the board from cover. Br |