CarTechnoloGY
Solved ✔ R270 + 080D0WQ, BMW Cluster - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Solved ✔ R270 + 080D0WQ, BMW Cluster (/showthread.php?tid=14405)

Pages: 1 2


R270 + 080D0WQ, BMW Cluster - emerer - 28-03-2016

Hi

I have 2 clusters, 1x E82 125i, 1x E82 135i.
I have desoldered the 080D0WQ chip, read with R270, changed VIN to 0xFF, erased mileage and soldered the chip.
Then i connected power to pin 9/18 on the table but the milage shows 999998 km, on both clusters.
Even if i use a new eeprom.
A BMW F10 cluster with 160D shows correct mileage after erasing.

What could be the problem that it shows 999998 km?

Thx for help handshake

original:
080D0WQ-0328(23)EEP(VM03497)_org.rar
File Type: .rar
Downloaded: 39 times
Size: 766 bytes



after clear vin and erasing mileage:
080D0WQ-0328(29)EEP.rar
File Type: .rar
Downloaded: 38 times
Size: 748 bytes




RE: R270 + 080D0WQ, BMW Cluster - GoldRush - 28-03-2016

Hi write km you want don't simply erase the km.


RE: R270 + 080D0WQ, BMW Cluster - antenor - 28-03-2016

If you have the dump put here to analyze if is ok.


RE: R270 + 080D0WQ, BMW Cluster - emerer - 29-03-2016

(28-03-2016, 20:13 PM)GoldRush Wrote:  Hi write km you want don't simply erase the km.
Ok, will try it.

(28-03-2016, 21:05 PM)antenor Wrote:  If you have the dump put here to analyze if is ok.
I attached the 2 files in first post.


RE: R270 + 080D0WQ, BMW Cluster - antenor - 29-03-2016

Sorry, I had no glasses ..
The DUMP looks fine but the VIN has not only 7 digits, you must have to delete the remaining line 306 to 30E.
But before verifies that the VIN corresponds.


RE: R270 + 080D0WQ, BMW Cluster - emerer - 29-03-2016

(29-03-2016, 10:29 AM)antenor Wrote:  Sorry, I had no glasses ..
The DUMP looks fine but the VIN has not only 7 digits, you must have to delete the remaining line 306 to 30E.
But before verifies that the VIN corresponds.
What i found thru Google its fine to 0xFF the 7 digits only, its the short vin and it has 7 digits.


RE: R270 + 080D0WQ, BMW Cluster - emerer - 29-03-2016

Solved.
If i erase mileage then it shows 999998 km.
If i change mileage to eg. 100 km then it shows 94 km in cluster.

I dont know why but its ok for me.


RE: R270 + 080D0WQ, BMW Cluster - einet - 02-04-2016

Have you use china eeproms?


RE: R270 + 080D0WQ, BMW Cluster - emerer - 06-04-2016

(02-04-2016, 21:48 PM)einet Wrote:  Have you use china eeproms?
New ones from Smelecom.


RE: R270 + 080D0WQ, BMW Cluster - diagtech - 06-07-2017

It will always show high mileage with first 2 lines erased you need to put a mileage in