CarTechnoloGY
Update lexia/pp2000 to diagbox v 7.2 .7.... - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: Update lexia/pp2000 to diagbox v 7.2 .7.... (/showthread.php?tid=171)

Pages: 1 2 3 4 5 6 7 8

Update lexia/pp2000 to diagbox v 7.2 .7.... - IMMO système - 01-10-2013

I open this new thread to ask how to update the firmware Of lexia3 i have alredy instal diagbox 7.16 but not work !! Help me Pls.regards

RE: Update lexia/pp2000 to diagbox v 7.2 .7.... - titoun - 10-10-2013

Hi IMMO système,

you have two way to make it compatible your XS EVO interface to diagbox 7.XX!
1st way: Hardware. Flash MB90F546GS microprocessor and SPI flash but you will need the files to be injected, an ISP programmer for MB90F546S and universal prog for SPI.
2nd way: Software. Ask the file to inject via USB to _nlc_ member on another forum but not registered here I think.

Regards.

RE: Update lexia/pp2000 to diagbox v 7.2 .7.... - IMMO système - 11-10-2013

How to read this flash MB90F546GS I think fijutsu
with witch programmer i can read and reprogram it
regards

RE: Update lexia/pp2000 to diagbox v 7.2 .7.... - titoun - 14-10-2013

Hello, here's a site where you have everything it takes to read and write to the microprocessor MB90F546GS

MB90F546GS.txt
File Type: .txt
Downloaded: 782 times
Size: 32 bytes



Here is a diagram of the connector for connection to the microphone interface card:
[Image: connec10.jpg]

Regards.
@++

RE: Update lexia/pp2000 to diagbox v 7.2 .7.... - IMMO système - 14-10-2013

(14-10-2013, 09:25 AM)titoun Wrote:  Hello, here's a site where you have everything it takes to read and write to the microprocessor MB90F546GS

http://isp-mb9x.sourceforge.net/

Here is a diagram of the connector for connection to the microphone interface card:

image

Regards.
@++
link is dead :huh: :smiley61: reupload :smiley14:

RE: Update lexia/pp2000 to diagbox v 7.2 .7.... - titoun - 14-10-2013

Sorry,

With RX1 to SIN1 and TX1 to SOT1 !

Regards.

[Image: attachment.php?aid=390]

RE: Update lexia/pp2000 to diagbox v 7.2 .7.... - racin-snake - 14-10-2013

Http://www.digikey.co.uk/product-search/en?x=16&y=17&lang=en&site=uk&KeyWords=865-1112-ND

this will do the MB90F546GS in circuit part number if link is corrupt is

,,,,,,,,,, 865-1112-ND at digikey

the winbond eeprom soic 8 or spansion (on genuine tool) can be done with willem wellon etc

RE: Update lexia/pp2000 to diagbox v 7.2 .7.... - titoun - 14-10-2013

For my part, for SPI flash (Winbond W25X40,W25X80,W25Q80B or spansion FL004, FL040, or...) i use a GQ3X from MCUMALL.

Here, bin files for flash MB90F546GS and SPI flash :

Good night at all !!!

Regards.

Titoun

RE: Update lexia/pp2000 to diagbox v 7.2 .7.... - IMMO système - 14-10-2013

Hi mate
do you biuld programmer to read mcu fijutsu ?
can you poste pictures of your project

regards

RE: Update lexia/pp2000 to diagbox v 7.2 .7.... - titoun - 15-10-2013

Hi,

Yes , here is my MCU MB90F546GS Fujitsu programmer:

   

   

Regards.