+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: CarProg unlock full no counter (/showthread.php?tid=1757)
Pages:
1
2
CarProg unlock full no counter - alba1 - 17-01-2014
CarProg unlock full no counter
Don't forget thanks and reputation button:tup
under)
RE: CarProg unlock full no counter - elektro128 - 17-01-2014
This version software and activ functions
v4.01
?
RE: CarProg unlock full no counter - alba1 - 17-01-2014
(17-01-2014, 13:35 PM)elektro128 Wrote: This version software and activ functions
v4.01
?
softwares up to v4.01
RE: CarProg unlock full no counter - romanr - 18-01-2014
inside is my picture A1 adapter after repair from xxx edited by MODERATOR
RE: CarProg unlock full no counter - bmwbmw - 20-01-2014
So it also works on version 3.90?
Thanks in advance!
RE: CarProg unlock full no counter - mexanico1971 - 21-01-2014
I use this version , I think !
cames width the device I buy, and work good until now !
BR
RE: CarProg unlock full no counter - viethaauto - 16-04-2014
Dasboad-> no responder
RE: CarProg unlock full no counter - flavyus1987 - 09-06-2014
I had reset my CP, with classic procedure, 55pin lift up.But after that i made a jumper from 3 pins from an old motherboard
.
RE: CarProg unlock full no counter - jmaayah - 14-06-2014
(09-06-2014, 19:30 PM)flavyus1987 Wrote: I had reset my CP, with classic procedure, 55pin lift up.But after that i made a jumper from 3 pins from an old motherboard
hi.
Can you please tell us what exactly you did. What jumper you have done- which 3 pins. Do you have pictures
Thank you
RE: CarProg unlock full no counter - flavyus1987 - 30-06-2014
I took 3 pins from an old mother board and soldered on CP board, and i use a jumper to select pin 55 for erase.