CarTechnoloGY
Dash peugeot 307 with Nec - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Dash peugeot 307 with Nec (/showthread.php?tid=1768)



Dash peugeot 307 with Nec - ruffles1986 - 17-01-2014

Hi, i have a dash from peugeot 307 with Nec Mcu, i have Nec programmer, i connect all point same the photo attached in software, but when is reading came error "Readout time-out Error". I see the documentation about this error and have this.

Error Message:Readout time-out Error.
Causes:This message can appear when NEC MCU do not respond long time.
Solutions:Check lines connected to MCU and try to reconnect by pressing "Start" Button .

I checked the connections and all is ok.

Any sugestion?

Thanks


RE: Dash peugeot 307 with Nec - koyot - 17-01-2014

Read with upa........


RE: Dash peugeot 307 with Nec - ruffles1986 - 17-01-2014

(17-01-2014, 22:55 PM)koyot Wrote:  Read with upa........

With upa always came "baudrate error", i check connections and jumpers and not work, i try to read with upa on board and on adapter and nothing... always same error, maybe 78k0 adapter is not good...

The dash work good


RE: Dash peugeot 307 with Nec - ferdes - 17-01-2014

This week, has happened to me the same with this programmer. Your problem is that you have a connexion with a bad contact.

Check it and it will work!

Good luck!


RE: Dash peugeot 307 with Nec - ruffles1986 - 18-01-2014

(17-01-2014, 23:26 PM)ferdes Wrote:  This week, has happened to me the same with this programmer. Your problem is that you have a connexion with a bad contact.

Check it and it will work!

Good luck!

You speak about nec programmer or UPA programmer??
i check wires connections some times and all saw good.


RE: Dash peugeot 307 with Nec - ferdes - 18-01-2014

(18-01-2014, 00:07 AM)ruffles1986 Wrote:  
(17-01-2014, 23:26 PM)ferdes Wrote:  This week, has happened to me the same with this programmer. Your problem is that you have a connexion with a bad contact.

Check it and it will work!

Good luck!

You speak about nec programmer or UPA programmer??
i check wires connections some times and all saw good.

With NEC Programmer in BSI Xsara Picasso

Pass us a picture with connections


RE: Dash peugeot 307 with Nec - pepesound - 24-01-2014

Just lift pin point 10 image and must be ok,tested 100% solution with NEC programmer


RE: Dash peugeot 307 with Nec - fred122 - 01-02-2014

What year your 307 m8


RE: Dash peugeot 307 with Nec - 23Andi23 - 01-02-2014

(01-02-2014, 14:14 PM)fred122 Wrote:  What year your 307 m8

First off all read the RULES


Second is to
Introduce Yourself

thankyou