+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63)
+---- Thread: Xentry OpenShell PassThru 09-10-11.2016 (/showthread.php?tid=17898)
RE: Xentry OpenShell PassThru 09-10-11.2016 - bobdinro - 13-09-2016
CATAHA u are the best, Thank you for install instruction.
RE: Xentry OpenShell PassThru 09-10-11.2016 - bobdinro - 17-09-2016
I cannot activate and make it work. have someone step by step instructions how make this version realy work? cataha make copy paste instructions from an older version and obviously dont work, cannot activate and start.
Thanks!
RE: Xentry OpenShell PassThru 09-10-11.2016 - CATAHA - 23-10-2016
Video and KeyGen has been Combined to First post
RE: Xentry OpenShell PassThru 09-10-11.2016 - crazy40 - 24-10-2016
Finally get the star key issues resolved. XDOS passthru working with CN Clone Actia and CN cheap clone Moongoose. But I can not code offline.Online is the only choice.
RE: Xentry OpenShell PassThru 09-10-11.2016 - CATAHA - 29-10-2016
(10-09-2016, 09:22 AM)lirunchang Wrote: How to solve this problem
look on this forum for CAL 870 fix or DAS 0 days fix or Xentry_timeout fix
Make sure you make it READ-ONLY for CAL lic and StarKey
RE: Xentry OpenShell PassThru 09-10-11.2016 - CATAHA - 20-11-2016
10.2016 Background picture has been Combined to First post
RE: Xentry OpenShell PassThru 09-10-11.2016 - bibkare - 22-11-2016
First of all great job CATAHA, i installed 05-2016 xentry passthru and it works OK with VAS5054 except VAS can't see proper CAR voltage (it shows constant 12V on first DAS window). I also tried to connect with x-horse MVCI and this time MVCI detects proper voltage however it could connect to only 2 modules on w211 while VAS could connect to all except SBC/ESP. Does anybody knows solution for VAS and voltage reading. I will open MVCI and compare it to VAS to try solve this. Post result in this thread.
RE: Xentry OpenShell PassThru 09-10-11.2016 - CATAHA - 22-11-2016
(22-11-2016, 16:10 PM)bibkare Wrote: First of all great job CATAHA, i installed 05-2016 xentry passthru and it works OK with VAS5054 except VAS can't see proper CAR voltage (it shows constant 12V on first DAS window). I also tried to connect with x-horse MVCI and this time MVCI detects proper voltage however it could connect to only 2 modules on w211 while VAS could connect to all except SBC/ESP. Does anybody knows solution for VAS and voltage reading. I will open MVCI and compare it to VAS to try solve this. Post result in this thread.From what i can remember since last week i was able to read all modules on w204 c230 and clear codes... i don't remember about voltage... but i'll comeback to it once i'll use it again and have more time(like an after hours thing)
On Another Note here is a PIN-OUTS for VAS5054 and site that shows some pinouts
RE: Xentry OpenShell PassThru 09-10-11.2016 - bibkare - 22-11-2016
According these pinouts pin8 is ignition at mercedes while at VW is some "CAN". Can this be true, what type of CAN uses pin 8. Strange. I will connect pin 8 with 1 and see will there be any difference.
UPDATE: Pins 1 and 8 does not have anything to do with voltage reading, there was no any difference i think it's a software problem because i could read live data from front SAM and it gave me correct voltage reading.
RE: Xentry OpenShell PassThru 09-10-11.2016 - stel_01 - 24-11-2016
Hi and thanks for the software much appreciated. do you know how to flash VAS5054 in order to work with xentry?