+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Drivers for vag tacho 3.01? (/showthread.php?tid=18403)
Drivers for vag tacho 3.01? - Johnnyw - 22-09-2016
Hi i just recived my vag tacho 3.01 but my cd was broken
does anyone know where i can find the program and drivers needed?
and is it just to install or do i need to install usb driver manualy?
my vag tacho i bought on aliexpress......
RE: Drivers for vag tacho 3.01? - cleiwil - 22-09-2016
(22-09-2016, 17:02 PM)Johnnyw Wrote: Hi i just recived my vag tacho 3.01 but my cd was broken
does anyone know where i can find the program and drivers needed?
and is it just to install or do i need to install usb driver manualy?
my vag tacho i bought on aliexpress......
____________________________________________
I hope it helps.
without dongle
RE: Drivers for vag tacho 3.01? - Johnnyw - 22-09-2016
Thx!
but i get usb to k-line interface not found. on the top of the program?
RE: Drivers for vag tacho 3.01? - Ashraf6119 - 22-09-2016
Try this and let us know.............
VAG Tacho 3.01+ Opel Immo Cable Install Guide
1)Plug the VAG Tacho 3.01 interface into your vehicle’s OBDII diagnostic port
2) Plug the USB cable from the other end of the interface into your Computer’s USB port.
3)Windows will attempt to install the correct USB drivers for the interface, but will not able to locate the correct drivers.
4)Go to the CONTRL PANEL, then DEVICE MANAGER
5)Find the Yellow (!) Icon under the UNIVERSAL SERIAL BUS CONTROLLERS directory
6)Right Click on USB ISO Interface and click UPDATE DRIVER SOFTWARE, click BROWSE MY COMPUTER FOR DRIVER SOFTWARE
7)Click the BROWSE button and expand the COMPUTER directory, then expand the CD/DVD rom drive, then select the folder VAG TACHO 3.01+ OPEL IMMO. Press OK, then NEXT
8)A windows security box may pop up asking to verify the publisher. Click INSTALL THIS DRIVER ANYWAY. Close the window after the driver is installed.
9)Open up the Disc contents and find the VAG TACHO 3.01+ OPEL IMMO folder. Click on the “vagtacho_opeldt” to start the application.
10)From here, select either the VAG or OPEL button and proceed with the functions you wish to perform. Enjoy!
RE: Drivers for vag tacho 3.01? - Johnnyw - 22-09-2016
Wich one is the usb driver?
does anyone feel to help me on teamviewer?
cant find any driver for usb in VAG TACHO 3.01+ OPEL IMMO folder. will wait until tomorow and hope the seller sends me any software.... thx so far
RE: Drivers for vag tacho 3.01? - Johnnyw - 25-09-2016
Hhhmmmmm! the seller has now sent me wrong drivers
sent me drivers for autocom!!! im realy tired at this shit now this is how my usb installation looks like when i use fdti and installation from post for vag Tech 3.01 above...