MOST adapter for ICOM - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: MOST adapter for ICOM (/showthread.php?tid=18900) |
MOST adapter for ICOM - tecnijl - 19-10-2016 Hello, I have a problem with the MOST adapter, the computer does not recognize, I use ICOM A2, I need the draivers for this adapter, anyone can help me? Thank you best regards RE: MOST adapter for ICOM - winter - 19-10-2016 (19-10-2016, 08:18 AM)tecnijl Wrote: Hello, I have a problem with the MOST adapter, the computer does not recognize, I use ICOM A2, I need the draivers for this adapter, anyone can help me? What's your mean for "MOST Adapter"?if it is ICOM B?and for ICOM A2 didn't need connect a ICOM B for car diagnostic,programming. RE: MOST adapter for ICOM - maxtorrld - 19-10-2016 You insert icom-b into computer usb port? RE: MOST adapter for ICOM - tecnijl - 19-10-2016 This is the adapter, I want to use in ista-p, programming RE: MOST adapter for ICOM - chriscom - 19-10-2016 Lol You have to connect the MOST adapter to the USB Port of the ICOM A2 RE: MOST adapter for ICOM - tecnijl - 19-10-2016 Yeah, I know, I connect, but the computer does not recognize the device RE: MOST adapter for ICOM - jararak - 19-10-2016 Make a walk on fresh air, than read it again, put usb cable from icomB(most adapter) to icom A (next to rj45 port), you don't need to put icomB to your computer, this will not work. RE: MOST adapter for ICOM - tecnijl - 19-10-2016 Forgiveness, now I understand, that not mastered the English language and did not understand, it now works well, thanks and regards RE: MOST adapter for ICOM - winter - 19-10-2016 (19-10-2016, 11:16 AM)tecnijl Wrote: Forgiveness, now I understand, that not mastered the English language and did not understand, it now works well, For F&G series,no need ICOM B for programming,for E series,ICOM B must connect to MOST connector in the car MOST routine.and A to B linked by USB cable. |