Update RNS315 Europe V8 EAST - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14) +--- Thread: Update RNS315 Europe V8 EAST (/showthread.php?tid=19023) |
RE: Update RNS315 Europe V8 EAST - vzinic - 03-12-2016 (03-12-2016, 00:35 AM)kurecar Wrote: Prosim pomagajte . Sem zaljubljen na Thanks I resolve problem RE: Update RNS315 Europe V8 EAST - benyclaudiu - 03-12-2016 To read the CID in SD: cat / sys / block / mmcblk0 / device / cid mmc0: 59b4 = you a fake card mmc0: 0001 = card OK RE: Update RNS315 Europe V8 EAST - tartu - 04-12-2016 (05-11-2016, 21:03 PM)benyclaudiu Wrote: Hi guys, someone could put map link Western Europe 310 V8, please, because it does not work the Torrent and it MEGA .... many thanks in advance Tartu RE: Update RNS315 Europe V8 EAST - tartu - 04-12-2016 (04-12-2016, 00:51 AM)tartu Wrote:(05-11-2016, 21:03 PM)benyclaudiu Wrote: Hello guys thanks a lot .... Found !!! Tartu RE: Update RNS315 Europe V8 EAST - benyclaudiu - 04-12-2016 Western Europe 310 V8 CID To read the original SD: cat / sys / block / mmcblk0 / device / cid sudo ./mmc prog_cid /dev/mmcblk0 0941504146205344021349037f00fa00 RE: Update RNS315 Europe V8 EAST - tartu - 04-12-2016 (04-12-2016, 08:15 AM)benyclaudiu Wrote: Western Europe 310 V8 Many thanks I did! Tartu RE: Update RNS315 Europe V8 EAST - benyclaudiu - 06-12-2016 These instructions are only valid for FX Western Europe 2016 V8 and only for the RNS-310! One-two things first: 1. There is no guarantee that the flash will work. Everything is done at your own risk. 2. You must bring more or less advanced knowledge in the handling of PC's or laptops. What you need: - Laptop with an SD card slot (a cardreader if it is compatible, more in step 8) - a microSD card from Samsung (models are below) - the map files (FX Western Europe 2016 V8) - USB stick with Linux (use Ubuntu in this How-To) - USB stick with the small program "mmc" for flashing the microSD card 1. Format the microSD card in Windows in FAT32 format. It can happen that you only display "NTFS" or "exFAT" with the 64GB versions, then you must get a tool, which can do this. (Fat32 format or HP USB Format Tool) 2. Unpack the Navi card and copy the folder "cryptnav" completely to the microSD card. (This may take longer depending on the PC / laptop) 3.1 Create an Ubuntu USB-Live-Stick (tools are available for "unetbootin", "Universal USB-Installer", etc.) 3.2 Copies the file "mmc" to the other USB stick. 4. Starts from the Ubuntu USB stick in the "live" version, is the first select menu item at "Try Ubuntu" 5. Now insert the microSD card into the SD card slot. 6. Open the "Terminal", in the upper left on the Ubuntu symbol and enter "terminal". 7. now you have to give admin rights. To do this simply sudo -s eigeben 8. Now test whether the SD card slot / cardreader is compatible. To do this, type df You will now see devices connected to the system. Very important here: you must see an entry "/ dev / mmcblk *", if you see only one entry with "/ dev / sd **", you know that this cardreader is incompatible. 9. Now you have to test whether the microSD card is compatible. To do this, type the following command Ls -l / sys / block | Grep mmc There are now a series of many entries. Look for a line with the "mmc0: 0001" entry, if you find it, you can use the microSD card. If you have an entry with zb. "Mmc0: 59b4", you can stop or test another microSD card. 10. Connect the second USB stick with the "mmc" file and copy the file to the desktop. Now go to the desktop folder in the terminal. To do this cd home / liveuser / Desktop (can be different) 11. Now grant the file extended write permissions. For this, chmod + x mmc 12. Now flip the CID of the microSD card. To ./mmc prog_cid / dev / mmcblk0 0941504146205344021383518c010100 Please note: this CID is only compatible with Western Europe 2016 V8! If everything went well, the terminal should spit out this issue: Success! Remove and reinstate SD card to check new CID. 13. microSD card out and back in again, then check whether the CID was really flashed. To Cat / sys / block / mmcblk0 / device / cid The terminal should now show you the CID that you flashed in step 12. The last two digits can be different, eg. .... c010101 if this is the case, it is not bad. Compatible microSD cards: The model, as eg. MB-MP32DA, can be found on the back of the package above the barcode) Samsung EVO 32 GB (MB-MP32DA) Samsung EVO 64 GB (MB-MP64DA) Samsung EVO PLUS 32 GB (MB-MC32DA) Samsung EVO PLUS 64 GB (MB-MC64DA) Samsung PRO 32 GB (MB-MG32EA) Samsung PRO 64 GB (MB-MG64EA) Samsung PRO PLUS 32 GB (MB-MD32D) Samsung PRO PLUS 64 GB (MB-MD64D) RE: Update RNS315 Europe V8 EAST - benyclaudiu - 08-12-2016 RNS-310 EASTERN EU maps CID: 0941504146205344021349037f00fa00 RNS-310 WESTERN EU maps CID: 0941504146205344021383518c010100 WITHOUT LOCKING THE CARD! RNS-315 EASTERN & WESTERN EU maps CID: 5d53424c32424d31013917ca53010400 LOCK key: C99A20843ED7D90B6801E49F2BC80277 All prepared, just have to wait for my friend to test the card on his RNS-310. RE: Update RNS315 Europe V8 EAST - Mojito - 12-12-2016 Hello, I have question about step 4. Where do I get folder VW? Is this the update that I downloaded or are the files that I can found on original VW SD card, and is just asked in this step, to copy all files from original SD card to the VW folder in ubuntu? Thank you for answer RE: Update RNS315 Europe V8 EAST - benyclaudiu - 15-12-2016 Dear friends I need a new firmware for 315 RNs who do not read the card slot now, and I can not get them updated on the card. does not see card Now I: software version 0410, if you have a newer software please post it here. Thank you |