Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid? (/showthread.php?tid=20167) |
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid? - simonchs - 08-08-2019 (08-08-2019, 18:03 PM)DayvG Wrote:(08-08-2019, 17:59 PM)yoodog Wrote: HW3.1 all 4gb and all HB2xx are 4gb - you have one of two cases HWEL_31DD -> NBTevo ECE FULL OL ID4 Rueko seems that ID4 unit with 2GB RAM? RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid? - DayvG - 08-08-2019 Yup! But 3.1 should be ID5/6 RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid? - rickynguyen - 08-08-2019 G31 body on CID apix1 with step down module here RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid? - Oreon - 03-10-2019 Is there really that much difference between APIX1 and APIX2 screens? I am looking at upgrading my 2014 i3 with NBT to NBT EVO, the 10.25" screens from the NBT and NBT EVO for the i3 look identical, same size and resolution so it should look the same when I use a cable with voltage regulator correct? I have read the picture quality is worse with the APIX1 is that also for the i3? It looks like they only changed the screen because of the voltage. Thanks! RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid? - rickynguyen - 07-10-2019 Any one try reverse order normal NBT with apix2 screen ?. I tried but not success, apix2 screen always "no signal" RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid? - kris_s - 31-10-2019 Hi guys, regarding to all what has been written i have an issue with my screen. I have EVO id4 from 11/16 B140 HW 2.3 and recently i bought 8.8 screen with part no 6 822 626 which is not working - NO SIGNAL problem. I've tried to code my HU with apix2, mmi, and 24 without success. Can anybody help my with this? RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid? - maaii11 - 31-10-2019 Try this CID_APIX_MODE apix1 CID_COLOR_DEPTH 18 CID_COM_MODE spi CID_RESOLUTION 1280 x 480 RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid? - sameur10 - 31-10-2019 (31-10-2019, 07:59 AM)kris_s Wrote: Hi guys,Evo id4 can run on this screen if still on id4 but after updating to id5/6 B140 is not capable to run apix2 ,only APIX1 ,Spi (07-10-2019, 10:47 AM)rickynguyen Wrote: Any one try reverse order normal NBT with apix2 screen ?. I tried but not success, apix2 screen always "no signal" You didnt succes because nbt power for CID is around 8V and apix2 screen work with 12V , already tested it and it works fine on NBT need to put 12V on cid and thats it RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid? - kris_s - 31-10-2019 That's exactly what i did with my id4. I've updated it to id5 but it still don't work with settings for APIX1 CID_COLOR_DEPTH 18 CID_COM_MODE spi CID_RESOLUTION 1280 x 480 If there is sign NO SIGNAL should I use step up voltage to 8,7V? RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid? - maaii11 - 31-10-2019 apx1 display needs 8.7v apx2 display needs 12v |