+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Car Technology Trucks / Heavy Vehicles Forum (https://cartechnology.co.uk/forumdisplay.php?fid=22)
+--- Forum: Trucks / Heavy Vehicles Problems & General Discussions (https://cartechnology.co.uk/forumdisplay.php?fid=32)
+--- Thread: I need ecm initialization (virgin) (/showthread.php?tid=20189)
I need ecm initialization (virgin) - atak - 12-12-2016
Help me
I need ecm initialization (virgin)
My vehicle model
Brand: kia
Model: New Granbird Bus
Ecm Version: 2013 D6CD- (L-ENG)
Ecm Brand : DELPHI
Ecm immobilizer not applicable
Similar to the ecm version below (also like the ecm pin number)
HYUNDAI
Model: TRAGO truck
Ecm Version: 2012 D6CC- (L-ENG)
Ecm Brand : DELPHI
Ecm immobilizer not applicable
K-TAG KIA truck & Bus not supported
HYUNDAI TRAGO truck support
I give up because ecm cover is too hard to remove
Ecm cover without removal
How can I read and write data using canvas lines?
I need to remove all the fault codes and initialize the ecm (virgin)
Fault code
P1061 : Decrease of exhaust gas recirculation air volume by step 1
P1062 : Decrease of exhaust gas recirculation air volume by Step 2
P1045 : Bad VGT controller initialization
Ask for a good idea
thank you
regards
atak