CarTechnoloGY
Rheingold, KDCan and no clamp 15 - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Rheingold, KDCan and no clamp 15 (/showthread.php?tid=20193)

Pages: 1 2

Rheingold, KDCan and no clamp 15 - milkyway - 12-12-2016

Hello!"

A friend of mine is using a KDcan cable with Rheingold 4.02.14.

If he has to switch of the ignition Rheingold will not recognize it. Is there a tool or something else to realize a clamp-changing?

I for myself use an Icom and due to this I've no problem and no solution for this (never used a KDCan cable).

Thanks in advance.

CU Oliver

RE: Rheingold, KDCan and no clamp 15 - Silva1337 - 12-12-2016

Dcan never seen any voltages, voltages are shown only with icom

RE: Rheingold, KDCan and no clamp 15 - milkyway - 13-12-2016

Hello!

That's clear and the same I wrote. The question is how can he show Rheingold a clamp change or how can he simulate it? Is there a tool which can do it (I mean there should be one for ISTA-P if you are using an emulator).

CU Oliver

RE: Rheingold, KDCan and no clamp 15 - Almaretto - 13-12-2016

(13-12-2016, 07:54 AM)milkyway Wrote:  Hello!

That's clear and the same I wrote. The question is how can he show Rheingold a clamp change or how can he simulate it? Is there a tool which can do it (I mean there should be one for ISTA-P if you are using an emulator).

CU Oliver

BB88 developed tools for both ISTA+ and ISTA-P.
ISTA+: Voltage Control. Last release I saw was for 4.01.22.
ISTA-P: ISTA-P Loader. 6.1F ICOM voltage control added (hotkey - ctrl+shift+k). Prior releases always show static readings for me.

RE: Rheingold, KDCan and no clamp 15 - milkyway - 14-12-2016

Hello!

Yeah, that's what I was looking for. I forgot the name of this tool (seems that I'm too old, Alzheimer is coming) and searched for battery but not for voltage. Thanks for your help!!!

CU Oliver

RE: Rheingold, KDCan and no clamp 15 - Martin1986 - 15-12-2016

'Almaretto Wrote:BB88 developed tools for both ISTA+ and ISTA-P.
ISTA+: Voltage Control. Last release I saw was for 4.01.22.
ISTA-P: ISTA-P Loader. 6.1F ICOM voltage control added (hotkey - ctrl+shift+k). Prior releases always show static readings for me.
So the tool won't work for newer ista? Need to downgrade then?

RE: Rheingold, KDCan and no clamp 15 - Almaretto - 15-12-2016

(15-12-2016, 17:45 PM)Martin1986 Wrote:  
'Almaretto Wrote:BB88 developed tools for both ISTA+ and ISTA-P.
ISTA+: Voltage Control. Last release I saw was for 4.01.22.
ISTA-P: ISTA-P Loader. 6.1F ICOM voltage control added (hotkey - ctrl+shift+k). Prior releases always show static readings for me.
So the tool won't work for newer ista? Need to downgrade then?

Tool is Version specific.

RE: Rheingold, KDCan and no clamp 15 - Martin1986 - 15-12-2016

(15-12-2016, 17:50 PM)Almaretto Wrote:  
(15-12-2016, 17:45 PM)Martin1986 Wrote:  
'Almaretto Wrote:BB88 developed tools for both ISTA+ and ISTA-P.
ISTA+: Voltage Control. Last release I saw was for 4.01.22.
ISTA-P: ISTA-P Loader. 6.1F ICOM voltage control added (hotkey - ctrl+shift+k). Prior releases always show static readings for me.
So the tool won't work for newer ista? Need to downgrade then?

Tool is Version specific.
Ok. Så before programming a module, it is best that I downgrade ista, so it will recognize when I need to switch off ignition?

RE: Rheingold, KDCan and no clamp 15 - Almaretto - 16-12-2016

(15-12-2016, 17:54 PM)Martin1986 Wrote:  
(15-12-2016, 17:50 PM)Almaretto Wrote:  
(15-12-2016, 17:45 PM)Martin1986 Wrote:  
'Almaretto Wrote:BB88 developed tools for both ISTA+ and ISTA-P.
ISTA+: Voltage Control. Last release I saw was for 4.01.22.
ISTA-P: ISTA-P Loader. 6.1F ICOM voltage control added (hotkey - ctrl+shift+k). Prior releases always show static readings for me.
So the tool won't work for newer ista? Need to downgrade then?

Tool is Version specific.
Ok. Så before programming a module, it is best that I downgrade ista, so it will recognize when I need to switch off ignition?

ISTA-P Loader is not specific to main program version.
ISTA+ Voltage Control is specific to program version.

RE: Rheingold, KDCan and no clamp 15 - Martin1986 - 16-12-2016

(16-12-2016, 09:29 AM)Almaretto Wrote:  
(15-12-2016, 17:54 PM)Martin1986 Wrote:  
(15-12-2016, 17:50 PM)Almaretto Wrote:  
(15-12-2016, 17:45 PM)Martin1986 Wrote:  
'Almaretto Wrote:BB88 developed tools for both ISTA+ and ISTA-P.
ISTA+: Voltage Control. Last release I saw was for 4.01.22.
ISTA-P: ISTA-P Loader. 6.1F ICOM voltage control added (hotkey - ctrl+shift+k). Prior releases always show static readings for me.
So the tool won't work for newer ista? Need to downgrade then?

Tool is Version specific.
Ok. Så before programming a module, it is best that I downgrade ista, so it will recognize when I need to switch off ignition?

ISTA-P Loader is not specific to main program version.
ISTA+ Voltage Control is specific to program version.
But ista loader doesn't help with, that the car doesn't recognize me pulling out the ignition key