+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Which eeprom programmer? (/showthread.php?tid=20243)
Which eeprom programmer? - James666 - 14-12-2016
O.k guys
so I'm new to the whole immo off thing,
I've bought myself a Chinese SP200S reader just to practice reading and writing files, does anyone use one and are they any good?
do you recommend a better programmer and if so which would be best.
I don't mind spending some money, but I don't want to spend a fortune on one.
it's just for personal hobby use.
all advice is appreciated and taken on board
RE: Which eeprom programmer? - Clusters - 14-12-2016
Best all around programmer for a reasonable price is UPA USB.
RE: Which eeprom programmer? - energjia - 14-12-2016
UPA-USB Serial Programmer
from elrasoft
RE: Which eeprom programmer? - James666 - 14-12-2016
Great, I've looked at those I think I will buy s version.
thanks guys
RE: Which eeprom programmer? - zmann - 15-12-2016
Basically we have two types of eeprom, serial - typically 8 pin IC and parallel - usually with over 20 pins.
You picked up SP200S which should support both of them while UPA (S) never support the parallel eprom, and most of the programmers of this type never do neither. UPA is excellence programmer but don't know your work scope, your may choose UPA now and acquire a universal one (like SP200S) for parallel eeprom later.
RE: Which eeprom programmer? - dil6222 - 15-12-2016
Hello totally agree with clusters and zmann I use
upa alot its the only programmer I haven't had any issues
with and supports a lot of chips/eeprom
RE: Which eeprom programmer? - fisekovic - 15-12-2016
Xprog is also very very cheap comparing what it can read
RE: Which eeprom programmer? - Vlado ATM Chiptuning - 15-12-2016
I think same thread was open xxxxx times, my friend, first of all take a look for what kind of job u need programmer, than buy, but every programmer is good ,much more u have it will be better, but for the start upa usb original is not expensive and read without mistake..
RE: Which eeprom programmer? - bluethree - 16-12-2016
Xprog-m ECU programmer
RE: Which eeprom programmer? - adel.nooh - 23-04-2017
(16-12-2016, 09:10 AM)bluethree Wrote: Xprog-m ECU programmerFrom reading many reviews i see that xprog-m (original or clone) is the best for immo (in circuit).
and carprog is the best in airbag.
Need others to share their experience.
