ADVICE for UPA USB - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: ADVICE for UPA USB (/showthread.php?tid=21011) |
||||||||||
ADVICE for UPA USB - bouizanne - 16-01-2017 Hi friends , i would like buy an UPA USB someone can to say me wich is better in this 2 models red : https://fr.aliexpress.com/item/DHL-free-2014-UPA-USB-Programmer-V1-3-with-Full-Adaptors-25-parts-25-Adaptors-ecu/1624657951.html?spm=2114.06010108.3.115.1XJOa3&ws_ab_test=searchweb0_0,searchweb201602_4_10065_10068_10000009_10084_10000025_10083_10000029_10080_10082_10081_10000028_10110_10111_10112_10060_10113_10062_10114_10056_503_10055_10054_10059_10099_501_10078_10079_10000022_10000012_10103_10073_10102_10000015_10096_10000018_10000019_10052_10053_10107_10050_10106_10051,searchweb201603_9,afswitch_5,single_sort_3_default&btsid=406f238f-65ba-406d-bb51-70b91e73f9f9 green : https://fr.aliexpress.com/item/2014-DHL-Free-Shipping-UPA-USB-programmer-V1-3-0-14-Newest-Version-upa-usb-With/1648703039.html?spm=2114.06010108.3.54.kgUdZJ&ws_ab_test=searchweb0_0,searchweb201602_4_10065_10068_10000009_10084_10000025_10083_10000029_10080_10082_10081_10000028_10110_10111_10112_10060_10113_10062_10114_10056_503_10055_10054_10059_10099_501_10078_10079_10000022_10000012_10103_10073_10102_10000015_10096_10000018_10000019_10052_10053_10107_10050_10106_10051-10102,searchweb201603_9,afswitch_5,single_sort_3_default&btsid=175d784c-a8f3-41ab-b69f-4afece3c80cf and after if i buy original (new model) http://www.elrasoft.com/uusps.htm , the UPA usb V1.3 adaptors (chinese) will work on this ? thank you by advance for your advices RE: ADVICE for UPA USB - teerak2uk - 16-01-2017 Original is better with free updates Yes adaptors will work still RE: ADVICE for UPA USB - bouizanne - 16-01-2017 OK thank but in this time better red or green PCB , i will buy original after RE: ADVICE for UPA USB - rs@chip - 16-01-2017 (16-01-2017, 14:25 PM)bouizanne Wrote: OK thank but in this time better red or green PCB , i will buy original after Buy red one mate..this one works with all 1.2 and 1.3r2..green will be cleaned(erased) if you dont install corect soft + drivers ADVICE for UPA USB - mikroel - 16-01-2017 [/quote] and after if i buy original (new model) http://www.elrasoft.com/uusps.htm , the UPA usb V1.3 adaptors (chinese) will work on this ? thank you by advance for your advices [/quote] Yes it will work Sent from my iPhone using Tapatalk RE: ADVICE for UPA USB - autoraedarum - 16-01-2017 Works also the scripts from here and other forum on original ? RE: ADVICE for UPA USB - bouizanne - 17-01-2017 (16-01-2017, 20:03 PM)alex.eobd2 Wrote:(16-01-2017, 14:25 PM)bouizanne Wrote: OK thank but in this time better red or green PCB , i will buy original after Hi friend thank for reply , i buy the green for the 21 adaptors ( NEC + TMS) , with red it's other adaptors i think it's old adaptor (?) and only 19 adaptors not the NEC and TMS adaptor , and what's will be erased ? 24C128 ? (16-01-2017, 20:29 PM)autoraedarum Wrote: Works also the scripts from here and other forum on original ? Good question , i think yes , it's not software ,just script , but it's better wait someone with experience say this ADVICE for UPA USB - mikroel - 17-01-2017 Depend which scripts. Not all scripts work with clone nor with ori.Some works some not. Sent from my iPhone using Tapatalk RE: ADVICE for UPA USB - bouizanne - 21-01-2017 Hi thank you friends , i receive my upa , install and activation is ok , my upa is recognized by software , but i have 2 test failed in part 5V test , TEST20 and TEST3 failed , Test3: P1=9V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V Result: P1=9,33V, P2=0,00V (L), P3=0,00V (L), P4=0,00V (L),P6=0,00V (L), P7=0,00V (L), P8=0,00V (L), P9=0,00V P1(9,33V ) not in 8,70V - 9,30V Test Failed --------------------------------------------------------------------------------------------------------------- Test20: P1=0V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=5V Result: P1=0,00V, P2=4,04V (L), P3=0,00V (L), P4=0,00V (L),P6=4,14V (L), P7=0,00V (L), P8=0,00V (L), P9=5,03V P2(4,04V ) not in 3,00V - 4,00V P6(4,14V ) not in 3,00V - 4,00V Test Failed all other test passed ,i was make this test in 12mA and with USB power and with 12v power same result , voltage is little over MAX When i make hardware test in 1mA i was 7 test failed voltage is little below MIN i put my result test if some can help me to repair it thank you by advance
|