E280 cdi DPF EGR - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: E280 cdi DPF EGR (/showthread.php?tid=21229) Pages:
1
2
|
E280 cdi DPF EGR - Selectronic - 24-01-2017 Hello mates, can somebody turn DPF & EGR off on EDC16CP31 , E 280cdi W211 (no Volta,Ecusafe or similar please) 1037393821 , bosch 0281012788 Thank you! RE: E280 cdi DPF EGR - QUICK SERVICE - 24-01-2017 (24-01-2017, 08:10 AM)simbika Wrote: Hello mates, Pleas DPF PRESSURE AND TEMPERATURE SENSORS HAVE BE DISCONNECTED RE: E280 cdi DPF EGR - Selectronic - 24-01-2017 (24-01-2017, 16:03 PM)QUICK SERVICE Wrote:(24-01-2017, 08:10 AM)simbika Wrote: Hello mates, Thanks but not working. What software did you use? EGR and DPF are stll ON and give DPF soot is to high after few minutes driving. RE: E280 cdi DPF EGR - fapremove - 24-01-2017 What is the problem ? BR RE: E280 cdi DPF EGR - ROD-BENDERS - 24-01-2017 (24-01-2017, 08:10 AM)simbika Wrote: Hello mates, Simbika it will be helpful to post up DTC's please in future here dpf egr off RE: E280 cdi DPF EGR - Selectronic - 25-01-2017 (24-01-2017, 19:22 PM)Buzzard Wrote:Thank you mates yesterday evening we solved this thing.I will test today your files again. Friend send me the reworked file.Now car runs OK , NO limp mode but 2 DTC's.(24-01-2017, 08:10 AM)simbika Wrote: Hello mates, P2084-002 DPF airmass flow control-mass is to low P2359-001 Boost press control - pressure to low (temporary dtcs - only when full throttle for longer time) DPF is totaly out of exhaust. Is it posible to turn off? Is it welldone or not? It is nice to have help like on this forum when you need it!!! AWESOME RE: E280 cdi DPF EGR - ROD-BENDERS - 25-01-2017 Write my file please Sent from my SM-N910F using Tapatalk RE: E280 cdi DPF EGR - Selectronic - 25-01-2017 (25-01-2017, 07:12 AM)Buzzard Wrote: Write my file please Buzzard's file working 100% but with all sensors ON. Still I have P2359-001 Boost press control - pressure to low and turn to limp mode!!! Maybe the flaps on the intake manifod are dirthy or stuck but i dont have time for do that now Is it posible to turn DTC off? Thank you and sorry to taking your free time RE: E280 cdi DPF EGR - QUICK SERVICE - 25-01-2017 (25-01-2017, 09:16 AM)simbika Wrote:(25-01-2017, 07:12 AM)Buzzard Wrote: Write my file please My file is not good? ? what is happening, what is the problem in my file RE: E280 cdi DPF EGR - ROD-BENDERS - 25-01-2017 (25-01-2017, 09:16 AM)simbika Wrote:(25-01-2017, 07:12 AM)Buzzard Wrote: Write my file please Simbika dpf egr off and applied extra point of dtc P2359 001 x1 off I think you should check for boost leak, or maybe turbo malfunction |