HDS 3.101.044 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Honda - Acura (https://cartechnology.co.uk/forumdisplay.php?fid=66) +---- Thread: HDS 3.101.044 (/showthread.php?tid=21567) Pages:
1
2
|
HDS 3.101.044 - jakerockon - 04-02-2017 Latest Hds software hit Rep and thanks Pass= honda RE: HDS 3.101.044 - margut - 22-02-2017 Hi, will this work with chinese mini VCI J2534 using GNA600 as with previous versions? RE: HDS 3.101.044 - SCOTT - 22-02-2017 (22-02-2017, 08:11 AM)margut Wrote: Hi, will this work with chinese mini VCI J2534 using GNA600 as with previous versions? Don't install the whole think, just update your system with the main application and calibration files . RE: HDS 3.101.044 - margut - 22-02-2017 (22-02-2017, 10:07 AM)SCOTT Wrote:(22-02-2017, 08:11 AM)margut Wrote: Hi, will this work with chinese mini VCI J2534 using GNA600 as with previous versions? Thanks for the reply. Is there any special instruction how to do the update? Can I just install the setup on top of the previous version which is 3.101.019 and that's it? Thanks in advance... RE: HDS 3.101.044 - jakerockon - 22-02-2017 (22-02-2017, 11:43 AM)margut Wrote:(22-02-2017, 10:07 AM)SCOTT Wrote:(22-02-2017, 08:11 AM)margut Wrote: Hi, will this work with chinese mini VCI J2534 using GNA600 as with previous versions? that should be good RE: HDS 3.101.044 - thusithasam - 23-02-2017 (22-02-2017, 11:43 AM)margut Wrote:(22-02-2017, 10:07 AM)SCOTT Wrote:(22-02-2017, 08:11 AM)margut Wrote: Hi, will this work with chinese mini VCI J2534 using GNA600 as with previous versions? I am also looking for how to update? Did u update HDS to new version.If yes please post how update it. RE: HDS 3.101.044 - SCOTT - 23-02-2017 (22-02-2017, 11:43 AM)margut Wrote:(22-02-2017, 10:07 AM)SCOTT Wrote:(22-02-2017, 08:11 AM)margut Wrote: Hi, will this work with chinese mini VCI J2534 using GNA600 as with previous versions? remove all folder from setup folder so looks like this then install it RE: HDS 3.101.044 - JLR SDD - 28-02-2017 Question is does able can run with MVci can transfer CM_ECU_calibration or not.... and hope can run GNA600 have full immo function....??? RE: HDS 3.101.044 - xtac1080 - 23-03-2017 Works great, thank you. Is there a PIN calculator available for this, or is it still limited to HDS 3.015.xxx and below? RE: HDS 3.101.044 - jakerockon - 24-03-2017 (23-03-2017, 08:07 AM)xtac1080 Wrote: Works great, thank you. Is there a PIN calculator available for this, or is it still limited to HDS 3.015.xxx and below? just read the instructions provided and you can use the calculator provided thanks |