CarTechnoloGY
Smok UHDS Support/Feedback/Backup Thread - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Smok UHDS Support/Feedback/Backup Thread (/showthread.php?tid=21970)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14


RE: Smok UHDS Support/Feedback Thread - djollie - 23-02-2018

(22-02-2018, 11:43 AM)volavka Wrote:  
(22-02-2018, 09:11 AM)djollie Wrote:  Does smok automatically backup original files from cluster on clio 4 when mileage change/ block abs sync function is performed...i want to return the cluster to original

thanks

dj

yes itself save to tempfiles folder

C:\Users\............\Documents\UHDS\TempFiles

they were backed up in documents folder happy


RE: Smok UHDS Support/Feedback Thread - auto-andre - 23-02-2018

Renault trafic ,clio,...airbag spc -very good


RE: Smok UHDS Support/Feedback Thread - djdanny - 24-02-2018

- Brand/Model of car: VW Touareg
- Year of car: 2006
- Feature in relation: mileage calibration (Dash+ECU)
- Result: Dash OK, EDC16cp k-line NOT WORKING (no damage)


- Brand/Model of car: Audi Q5
- Year of car: 2009
- Feature in relation: dash mileage
- Result: OK


- Brand/Model of car: Citroen C3
- Year of car: 2011
- Feature in relation: Mileage dash+ Valeo BSI
- Result: Dash ok by obd, BSI VALEO NOT WORKING (no damage)


- Brand/Model of car: Peugeot Expert III
- Year of car: 2009
- Feature in relation: Mileage BSI JC by obd
- Result: OK


RE: Smok UHDS Support/Feedback Thread - welsh - 28-02-2018

I'm new with my uhds.
Got audi a3 2.0bkd fujitsu cluster.
All keys lost..
Using Xcan how make key?
Have security block, Vcds not do dealer key.

And uhds only have tick.box for all keys lost?
What to do after click checkbox?
Says ground point on cluster, but no schematic.
Plus nothing other than the check box for this model.

I see keymaker under uhds also, but what additional HW is needed to do this?

Am I missing something?

Otherwise, worked well cloning cluster and mileage 2012 transporter T5.1.

Appreciate any assistance.


RE: Smok UHDS Support/Feedback Thread - auto_peugeot - 01-03-2018

We tried to change the km laguna 3 2011 to abs ATE, but without success I waited 160 minutes sad


RE: Smok UHDS Support/Feedback Thread - Gietek1 - 02-03-2018

Recently, the synchro blocking function in megane 3 (abs vdo) has disappeared.
I did it by laguna 3.
support says that the operator can not help it smile After re-contact, they admitted that something escaped them ..... ehhhh

Audi A3 2010year only reads km, the rest does not work...


RE: Smok UHDS Support/Feedback Thread - welsh - 02-03-2018

Audi A3 is 2005, is BKD.
Any advice appreciate


RE: Smok UHDS Support/Feedback Thread - escobaR - 14-03-2018

Clıo4 esp mileage change not work.( after abs modul defective)
toyota corolla auris dash mileage change not work.
dsg read write not work.
renault ecu obd mileage change not work.
vag 24c64 2014- not work.
mercedes w212 2014 not work.( change button click and dash 16xxxxxx... ı ınstall blocker)
jeep renegade mileage change not work
.
VERY İMPORTANT--cıtroen bsı continental 06/2015 mileage change ok but keys erased car not work. pın read and try key learn but pın error give warning.The pin read by uhds and the pin read by avdi are the same. ı try key learn by avdi. programming ok


ı have full uhds and annual membership.I can test it for you if there is something you want to test


RE: Smok UHDS Support/Feedback Thread - volavka - 14-03-2018

Tried today with dacia logan 2016with ecu dcm3.4 by obd .. not work
managed to open ecu and read dump from eeprom 95640 and change it by hand

best regards


RE: Smok UHDS Support/Feedback Thread - teerak2uk - 14-03-2018

(14-03-2018, 10:53 AM)escobaR Wrote:  Clıo4 esp mileage change not work.( after abs modul defective)

Did you clear fault codes after or are they permanent