+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA+ 4.02.12 Standalone problem (/showthread.php?tid=22399)
ISTA+ 4.02.12 Standalone problem - arpifree - 07-03-2017
Hello!
I need some help related to latest ISTA+ (4.02.12). I have problem with service functions and calculated measures plan, these functions remain blank. Can anyone help me?
Thanks iin advance!
RE: ISTA+ 4.02.12 Standalone problem - emhtuning - 07-03-2017
Take screenshot to understand your issue
RE: ISTA+ 4.02.12 Standalone problem - arpifree - 07-03-2017
(07-03-2017, 05:21 AM)arpifree Wrote: Hello!
I need some help related to latest ISTA+ (4.02.12). I have problem with service functions and calculated measures plan, these functions remain blank. Can anyone help me?
Thanks iin advance!
Hello!
Here er some pics, everything looks fine until the calculated test plan is not started or a service function. All other information displayed as it should as wiring diagrams, repair instructions etc.
RE: ISTA+ 4.02.12 Standalone problem - egyclick - 07-03-2017
Hello, you have to install Adobe Reader XI, if you already have it then it's possible your ISTAD is incomplete
RE: ISTA+ 4.02.12 Standalone problem - pdc - 07-03-2017
Hi
I think you need two things:
1-ICOM
2-Pzsdata full installed on the correct directory
otherwise that options will be greyed
RE: ISTA+ 4.02.12 Standalone problem - arpifree - 07-03-2017
(07-03-2017, 09:17 AM)egyclick Wrote: Hello, you have to install Adobe Reader XI, if you already have it then it's possible your ISTAD is incomplete
Actually i use higher Version of Acrobat Reader, but i unistall now that one and install the XI.
Thanks.
(07-03-2017, 09:48 AM)pdc Wrote: Hi
I think you need two things:
1-ICOM
2-Pzsdata full installed on the correct directory
otherwise that options will be greyed
Yes, i use ICOM, but it's the same With ETHERNET cable, did not have problem With previous Versions, psdzdata is linked from ISTA-P, and Works fine With E-Sys and everything else,so....
I think now i found problem, vc++ update was missing, i'll see...
Thanks!
So, the problem is still present.
Version 4.02.12 and 4.04.12 cannot be installed properly,because or the service functions/calculated testplan or the database error comes up in start up. Yesterday i've put the 4.03.31 version and this works fine. Any idea?