+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Coding E83 help (/showthread.php?tid=22517)
Coding E83 help - kakarotyaaj - 10-03-2017
Please help trying to code using ISAT-P v.3.61, I'm a newbie trying/learning to code so be patient with me.
I've replace a RLS, I'm try to code and got stuck on the "Initialisation by terminal change"
I was afraid to turn off the key, can someone clarify this step for me as I am still trying to learn coding. See photo for more detail. The photo are in ascending order. I will re-code it again untill someone confirm.
Here are the thing that I have lost after coding.
1. daytime driving light is off
2. Automatic door lock after certain kilo.
3. Clown light is not turning on
Thanks for helping.
RE: Coding E83 help - mprezes - 10-03-2017
If ISTA asks to turn off ignition you have to do it, nothing bad can happen, just follow those steps. It would be easier and faster to use NCSExpert to do coding instead of using ISTA.
RE: Coding E83 help - kakarotyaaj - 10-03-2017
(10-03-2017, 18:37 PM)mprezes Wrote: If ISTA asks to turn off ignition you have to do it, nothing bad can happen, just follow those steps. It would be easier and faster to use NCSExpert to do coding instead of using ISTA.
Thanks! now I feel more confident I will go ahead and re-code again.