Good or Bad Vas5054A - Printable Version

Good or Bad Vas5054A - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: Good or Bad Vas5054A (/showthread.php?tid=22553)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

RE: Good or Bad Vas5054A - apoelistas - 18-08-2018

(18-08-2018, 16:27 PM)snypertje Wrote: So that's the problem. This is my second Vas5045a and the seller said it is the best quality. Where can I buy a good quality Vas5054a.

You need vas5054a with original amb2300. Then you can rework or swap parts from one to the other..

There is no perfect vas5054a with amb2300 made in china.

orkaskawina did not reply. He has the best vas5054a made in china I have seen with original amb2300

RE: Good or Bad Vas5054A - Bimmer540 - 18-08-2018

(18-08-2018, 17:18 PM)apoelistas Wrote:
(18-08-2018, 16:27 PM)snypertje Wrote: So that's the problem. This is my second Vas5045a and the seller said it is the best quality. Where can I buy a good quality Vas5054a.

You need vas5054a with original amb2300. Then you can rework or swap parts from one to the other..

There is no perfect vas5054a with amb2300 made in china.

orkaskawina did not reply. He has the best vas5054a made in china I have seen with original amb2300

So I can not get a BT connection with this Vas5054a

RE: Good or Bad Vas5054A - apoelistas - 18-08-2018

(18-08-2018, 18:19 PM)snypertje Wrote: So I can not get a BT connection with this Vas5054a

Try odis-s 4.2.3 (this should work) or 4.3.3 with the revised Softing driver.

However memory not 5V. Might overheat. Memory spec is 3.3V working as 5V (overvoltage). I used heatsinks on mine but not sure if that is enough. Better to rework memory if you have the skills. Haven't done mine yet.

RE: Good or Bad Vas5054A - Bimmer540 - 18-08-2018

(18-08-2018, 18:41 PM)apoelistas Wrote:
(18-08-2018, 18:19 PM)snypertje Wrote: So I can not get a BT connection with this Vas5054a
Try odis-s 4.2.3 (this should work) or 4.3.3 with the revised Softing driver.

However memory not 5V. Might overheat.

I use 4.2.3. I will try and otherwise with cable. tears

BT is not working. When I put Vas5054a in the car after a few seconds it begins to beep? think

RE: Good or Bad Vas5054A - orkaskawina - 20-08-2018

(18-08-2018, 17:18 PM)apoelistas Wrote:
(18-08-2018, 16:27 PM)snypertje Wrote: So that's the problem. This is my second Vas5045a and the seller said it is the best quality. Where can I buy a good quality Vas5054a.

You need vas5054a with original amb2300. Then you can rework or swap parts from one to the other..

There is no perfect vas5054a with amb2300 made in china.

orkaskawina did not reply. He has the best vas5054a made in china I have seen with original amb2300

Hi

I did not have a few days, I went to buy a car. The head I bought from a private seller had only one.

RE: Good or Bad Vas5054A - Diagnostix - 20-08-2018

Why is everyone so concerned about BT anyway? A cable connection is far more reliable in my humble opinion.

RE: Good or Bad Vas5054A - bersch8688 - 21-08-2018

Hi,

My ODIS 4.3.3 cant detect VAS5054A but ODIS Engineering 8.1.3 detect my VAS5054A and can use on Car's.

Can anyone me say or help please?

RE: Good or Bad Vas5054A - apoelistas - 21-08-2018

(20-08-2018, 22:34 PM)Diagnostix Wrote: Why is everyone so concerned about BT anyway? A cable connection is far more reliable in my humble opinion.

Because only original amb2300 Bluetooth can automatically swap firmware of vas5054a and work correctly with odis version

RE: Good or Bad Vas5054A - turp9 - 21-08-2018

Lets say with a miracle there is original AMB2300 chip. Is it possible to desolder that blue chip and replace it with original? Will it work or it needs other parts or different pcb to use it with clone vas?

RE: Good or Bad Vas5054A - Bimmer540 - 21-08-2018

(21-08-2018, 16:25 PM)turp9 Wrote: Lets say with a miracle there is original AMB2300 chip. Is it possible to desolder that blue chip and replace it with original? Will it work or it needs other parts or different pcb to use it with clone vas?

I would also like to know that. I have no problems with cable, but I have paid incl bt, but would like it to work.

(I pullt the silver cover off AMB2300 and I have MX on it)

I use BT adapter that is delivered by vas5054a. (could that be the problem?)

[Image: 201426870.jpg]