+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS (/showthread.php?tid=23198)
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS - Fatalix - 25-11-2018
Does this program create my own 9C Apps retrofit FSC code? Ive got a e91 2011 with CIC that i want apps for.
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS - rdd - 29-11-2018
It works like a charm on my retrofitted CIC, X5 2008.
Only had a small issue with entering 1B certificate(FSTool was throwing error 7009), but after updating EDIABAS with Dr.Gini's files, as it is described in this thread, all went well.
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS - mdlx - 01-12-2018
Hello, i have retrifited from small CIC to biger, can somebody heplp me with activation ? All cables and sofwares are installed in pc, just missing some expierence, please write in pm, not for thanks
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS - djvirus - 11-12-2018
My FStools is everytime throwing error that the sig cert cannot be stored. I used the sig cert from the archive. This one is everytime rejected.
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS - SERNAS2 - 16-12-2018
(11-12-2018, 09:30 AM)djvirus Wrote: My FStools is everytime throwing error that the sig cert cannot be stored. I used the sig cert from the archive. This one is everytime rejected.
SAME FOR ME USING ESYS LOOKING AT MANUAL PAGE 3 StoreSigCer, WHEN PRESSING START ERROR APPEARS
Please enter an Application Number and an Upgrade index first (g099)
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS - AlpineF30 - 19-12-2018
Quick question
I bought a cic from ebay that was already retrofitted into a car before I bought it.
If I use this patcher will it remove the activation method the previous owner used so I can then start from the beginning?
Thanks
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS - ovidiubuzzi - 21-12-2018
Hello.Does this patch work on a CIC for western europe? I live in Spain so that is why i am asking.or for this part of Europe is another patch ?Thank you
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS - duckdonald - 21-12-2018
(21-12-2018, 06:15 AM)ovidiubuzzi Wrote: Hello.Does this patch work on a CIC for western europe? I live in Spain so that is why i am asking.or for this part of Europe is another patch ?Thank you
yes, work..
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS - n2siast - 23-12-2018
Few questions as I"m about to undertake this with the plans to retrofit a Combox.
Caveat - I already cloned my CIC HD to an SSD and I can access all files on the HD Via QNX
1. After I Patch, can I just edit the VIN on the FSC Files in a hex editor as opposed to FStool?
2. Assuming I edit the VIN and add my own VIN to the FSC Files, can I just copy them over to the Hard Drive as opposed to using FStool to load them? Same for the Certs, can I load the files by copy and paste via QNX?
3. If the above can be done, what partition or path would I load these files?
Thanks in advance.
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS - duckdonald - 23-12-2018
no, this is not possible.
the FSC in addition to the change vin must be signed. and for the insertion it is necessary to validate the certificates, otherwise they are rejected.