ECU MED9.5.10 death after flahing - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: ECU MED9.5.10 death after flahing (/showthread.php?tid=23233) |
ECU MED9.5.10 death after flahing - tiguan - 04-04-2017 Hi All I readed flash OBD and try to write mod file with fgtech but it stop on 26% and now is dead, removed and tryed on BDM file *(Tool - Ktag) what I read over obd but same ecu dead. Can anybody make a file from my obd read and bdm read after or have full bdm file ? ECU label is this numbers: VW Golf5 1.6 FSI 1037382189 0261S02117 03C906056AB MED9.5.10 I writed flash again, problem in mpc or eprom please if anybody Help or repair this file, BDM file thank you RE: ECU MED9.5.10 death after flahing - georgea - 05-04-2017 Try to flash with VAS5054A... RE: ECU MED9.5.10 death after flahing - erich.hai - 05-04-2017 Flash with VAG CAN PRO with original file i have flash many cars with original works perfekt. RE: ECU MED9.5.10 death after flahing - loki954 - 05-04-2017 When you flash with galletto you should put a good charger on the car. if the votage drop, galletto stops. If you have kess you can flash the ori file with recovery. RE: ECU MED9.5.10 death after flahing - kostasics - 15-04-2017 Write back file in bench with fg . Just select mpc and write . |