CarTechnoloGY
What is wrong: Peugeot expert 2009 - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: What is wrong: Peugeot expert 2009 (/showthread.php?tid=23288)



What is wrong: Peugeot expert 2009 - strikeforce - 06-04-2017

Car is all keys lost. I initially tried reading bsi but no luck. I had to buy pincode from Peugeot assembly plant in my country and key is programmed successfully, but car is still not starting. Scanned the car and got the following
=====2017-04-04 12:05:18=====
fuel sender signal Open circuit.Local
Oil gauge fault Local
front/rear courtesy light lighting control fault Short circuit to positive. Local
illumination of the rear LH side lamp Short circuit to positive. Local
absence of command of the starter Coherence fault.Local Unexpected re-initialisation fault coming from the BSI Local no communication with engine ECU Local
Fault aircon pressure information Distant
oil temperature sensor information fault Distant
Study fault : Do not take it into account Local

Is the communication with ecu dependant on bsi?
B
Car battery has been removed several times and I think the bsi get corrupted in the process. What I don't know is if that will cause no communication with the ecu.


RE: What is wrong: Peugeot expert 2009 - CHIKODIAG - 06-04-2017

HI
yes the commenecation with ecu need the bsi
can you pls post your fill from bsi or your bsi information and ecu
1/ check your fuse
2/ your can line from bsi to ecu
i think if your file of bsi is corrapt it will not aksept the pin and the new keys
GOOD LUCK


RE: What is wrong: Peugeot expert 2009 - strikeforce - 06-04-2017

(06-04-2017, 18:53 PM)CHIKODIAG Wrote:  HI
yes the commenecation with ecu need the bsi
can you pls post your fill from bsi or your bsi information and ecu
1/ check your fuse
2/ your can line from bsi to ecu
i think if your file of bsi is corrapt it will not aksept the pin and the new keys
GOOD LUCK

Thanks
I lost the bsi label but I have the same bsi from a Peugeot 407 I worked on sometimes back. See attachment
Pic no. 1 is original bsi for the car and the rest is from 407 with similar bsi


RE: What is wrong: Peugeot expert 2009 - mar.wo - 07-04-2017

Bsi JC is in economy mode probably, try to wake up it.


RE: What is wrong: Peugeot expert 2009 - CHIKODIAG - 07-04-2017

HI
in attachemnt it is a virgine file for your bsi werit to the bsi and use pp200/digbox
reprograme the keys and telecode the car
let mi know
GOOD LUCK


RE: What is wrong: Peugeot expert 2009 - elektronik13 - 17-04-2017

(07-04-2017, 10:13 AM)CHIKODIAG Wrote:  HI
in attachemnt it is a virgine file for your bsi werit to the bsi and use pp200/digbox
reprograme the keys and telecode the car
let mi know
GOOD LUCK
This file is not virgin


RE: What is wrong: Peugeot expert 2009 - CHIKODIAG - 17-04-2017

HI SORRY
FOR THAT IT IS GOOD TO REPLAY
GOOD LUCK