Solved ✔ E-sys "Code Default Values" problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Solved ✔ E-sys "Code Default Values" problem (/showthread.php?tid=23414) |
E-sys "Code Default Values" problem - masa52 - 11-04-2017 HI ALL I've Press "Code Default Values" in NBT in my f06 now i can't code my orginal VO as CAFD not existing so tried to inject latest CAFD but unfortunately got an error please if anyone can help?? what need to do shall I reflash unit or any other solution thanks [Exception - HU_NBT - 63] job failed with negative response error: code: service returned global negative response description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; ECU: HU_NBT_63_ETHERNET severity: ERROR RE: E-sys "Code Default Values" problem - Almaretto - 13-04-2017 Have you tried multiple CAFD versions? Are you doing this with engine running? Are you trying this with just E-sys (bypass Launcher)? Are you using ENET or ICOM? RE: E-sys "Code Default Values" problem - masa52 - 13-04-2017 Problem solved S698 was causing that issue, removed it from VO and coded any way that was strange as 698 was factory option RE: E-sys "Code Default Values" problem - Almaretto - 14-04-2017 (13-04-2017, 09:52 AM)masa52 Wrote: Problem solved Were there any FA modifications? RE: E-sys "Code Default Values" problem - masa52 - 14-04-2017 No at all! thats why is strange, milkway from forum had same issue and hi gave me a hint RE: E-sys "Code Default Values" problem - Mwahab - 08-05-2017 (14-04-2017, 13:57 PM)masa52 Wrote: No at all! I have a question in here .. If we coded a locked NBT2 to code to default values, would this unlock it? and how to retrieve a module from a code to default value state? |