Need help on peugeot 407 pin code reading in hex editor - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Need help on peugeot 407 pin code reading in hex editor (/showthread.php?tid=23520) |
Need help on peugeot 407 pin code reading in hex editor - sk380 - 15-04-2017 Need help on this peugeot 407 pin code reading, I can't seem to get it from the hex editor. much appreciate if can help on this or guide me thru the conversion in hex editor. RE: Need help on peugeot 407 pin code reading in hex editor - volavka - 15-04-2017 VIN: VF36DRFNE21145209 PIN: G571 or reserve RE: Need help on peugeot 407 pin code reading in hex editor - sk380 - 15-04-2017 Capture screen on hex editor I'm using. RE: Need help on peugeot 407 pin code reading in hex editor - volavka - 15-04-2017 Set legacy ASCII then enverse bits you will see decrypted code and VIN RE: Need help on peugeot 407 pin code reading in hex editor - sk380 - 15-04-2017 (15-04-2017, 15:33 PM)volavka Wrote: Set legacy ASCII then enverse bits you will see decrypted code and VIN hi, i m sort of a newbie, not quite sure how to do enverse bits, mind to share a screen capture on how it can be done, my hex editor doesn't seem to work. : ( RE: Need help on peugeot 407 pin code reading in hex editor - xander20005 - 15-04-2017 Try other hex editor (i use hxd) and I dont know if your OS is the best for these jobs. RE: Need help on peugeot 407 pin code reading in hex editor - elektronik13 - 15-04-2017 FILES IS PIN PRESS THANKS RE: Need help on peugeot 407 pin code reading in hex editor - sk380 - 16-04-2017 Thanks guys, i finally figure it out using VVDI Programmer to load to the dump and did the reverse selection, work like charm!! RE: Need help on peugeot 407 pin code reading in hex editor - Kennfeld - 16-04-2017 (15-04-2017, 15:46 PM)sk380 Wrote:(15-04-2017, 15:33 PM)volavka Wrote: Set legacy ASCII then enverse bits you will see decrypted code and VIN just read from end to begin ! |