DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56) +---- Thread: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) (/showthread.php?tid=24161) |
DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - Simple - 09-05-2017 Attached is a Magnet link which includes DiagBox 7.01/02 + Updates -> 7.82 + B/C Firmware + Drivers + Tools. It includes: 1- DiagBox 7.01/02 2- DiagBox Updates up to 7.82 3- DiagBox Windows Drivers 4- VCI Firmware Flashing files (APPLI.COM 4.3.2 + VCI_UPDATER.COM Revision /C) 5- Flashing Tools Passwords needed are within the included documents. DiagBox Update 7.83: http://cartechnology.co.uk/attachment.php?aid=41997 Simple.. RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - Organised Chaos - 30-08-2017 Hi, I downloaded this via bittorrent but upon installation I get a message saying the installer is corrupt... Could anyone help please? Many thanks for all the good work you guys do, there's some great stuff on this forum ! RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - mrdude - 20-10-2017 Thanks for this, it worked fine for me using windows 7 32 bit in a virtual machine. RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - galaxia - 14-01-2018 Ok, thanks for the info. But this version update is one by one 7.02 up 7.82 , or direct installation ? RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - doktorabg - 21-01-2018 What is with Telecoding ? Work or not? RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - gyenge - 25-01-2018 Which Updated support romanian language ? RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - ted777 - 07-02-2018 I upgraded successful to 7.62 but after upgrade 7.62 to 7.66 received message : an error has occurred Restart the diagnostic tool If this problem persists, please contact technical assistance validate to continue than diagbox shut down. I would appreciate any suggestions to solve this issue Thank you in advance RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - Simple - 08-02-2018 Ensure you have .NET 3.5 is installed and run DiagBox as Administrator. RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - ted777 - 08-02-2018 (08-02-2018, 08:15 AM)Simple Wrote: Ensure you have .NET 3.5 is installed and run DiagBox as Administrator. Do i need NET 3.5 on win xp no virtual machine is running? Thanks RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - GoldRush - 08-02-2018 Hi yes you need net 3.5 for xp . |