DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56) +---- Thread: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) (/showthread.php?tid=24161) |
RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - vasil80 - 09-02-2018 Hi guys, My name is Vasilis from Greece 34 yo.. I downloaded all stuff and successfully installed diagbox until 7.76 (can t install 7.82,i put the correct pass but nothing happens) My laptop is on windows 10 64bit,but the installation is on (through vm virtualbox) xp 32 bit.. so,now i am at the point that asks to connect a vci card After installing,what are the next steps (must i input any other settings/codes anywhere?, i will use it for Peugeot car)? I have a bluetooth elm327 device but i am not sure if this is the thing to make the job done..it is something like this more or less https://www.aliexpress.com/item/2016-Code-Reader-Super-Mini-ELM327-Bluetooth-Odb2-Scanner-ELM-327-Bluetooth-Smart-Car-Diagnostic-Interface/32697521803.html Is this good for me? https://www.aliexpress.com/item/2015-Super-New-Funcation-Full-Chips-Lexia-3-PP2000-Diagnostic-Tool-Citroen-Peugeot-Lexia3-V48-V25/32267423832.html?spm=2114.search0104.3.15.59617857RCGGaw&ws_ab_test=searchweb0_0,searchweb201602_1_10152_10151_10065_10068_10344_10342_10343_10340_10341_10084_10083_10618_10304_10307_10302_10313_10059_10534_100031_10103_10624_10623_10622_10621_10620_10142,searchweb201603_1,ppcSwitch_5&algo_expid=d8feab36-c416-45a6-841d-095d6e97f061-2&algo_pvid=d8feab36-c416-45a6-841d-095d6e97f061&transAbTest=ae803_5&priceBeautifyAB=0 Thanks in advance for suggestions about next steps RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - vaho - 13-02-2018 You absolutely need the second one, nothing to do with ELM. Full chip is the way to go. RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - gyenge - 14-02-2018 What version of Diagbox support Romanian language ? RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - MORKAS - 19-02-2018 Hello, greetings, I wanted to inform me a little about this diagnosis system for Peugeot.Citroen, because in my house, my father has a Peugeot 308 EHdi, of the year 2015, I remember. Which is the most recent and valid device version that I have to search online to buy? ... thanks RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - teerak2uk - 05-05-2018 (09-05-2017, 21:31 PM)Simple Wrote: Attached is a Magnet link which includes DiagBox 7.01/02 + Updates -> 7.82 + B/C Firmware + Drivers + Tools. It includes: got to v7.74 it asks for activation RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - patrikspain - 13-08-2018 Hi. Running DiagBox v7.40 with FW 4.3.5 (appli.com) Diagbox recognice the interface, but it always replies with "No dialogue" My interface is not full chip. But I should get response some how anyway, shouldnt I? RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - cathal00 - 27-08-2018 Hi. New to this site so sorry if this isn't the right place to post this. I have diagbox 7.57 with the PSA Interface at V4.3.2 I have problem with communication to ECU. Always getting the no dialogue fault. Car is not in economy mode. Firewall isn't blocking anything. I have tried numerous installs of diagbox trying to fix this problem and still to no avail. Have tried the diagbox on two different cars. PP2000 works on the older car though. Running on win xp sp3 32bit. .NET 3.5 installed etc. Is this a software or a hardware issue? RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - zmann - 28-08-2018 @patrikspain if your DB sw not updating the FW automatically when start (and this happening to those new version of v7.xx, v8 but don't remember exactly) you may check from the below list and up/down grade manually by PSA interface checker and try again v4.2.2 : Lexia/PPS last version (v348.01/v25.01) v4.2.4 : DB v5.02 to v5.29 v4.2.8 : DB v5.30 to v5.?? v4.2.9 : DB v5.43 to v6.10 v4.3.0 : DB v6.11 to v7.39 v4.3.2 : DB v7.40 to ~v7.61 ? v4.3.3 : DB ~v7.61 to ~v7.xx ? (quite short life) v4.3.4 : DB ~v7.66 to ~v8.02 ? v4.3.5 : since DiagBox v8.45 not 100% precisely just about on some version Usually with wrong FW version would cause "no dialouge' @dialouge you didn't mention the car and the ECU. Old cars with old ECU's and they are all with K-line protocols to diag tool. Newer cars since 2007 are plenty with CAN protocol ECU's but still with some K-line though. Your tool might suffer some communication channel/protocol which allocated on different OBD pins RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - danny0n - 30-10-2018 (05-05-2018, 18:57 PM)teerak2uk Wrote:(09-05-2017, 21:31 PM)Simple Wrote: Attached is a Magnet link which includes DiagBox 7.01/02 + Updates -> 7.82 + B/C Firmware + Drivers + Tools. It includes: I have the same problem. At 7.74 it asks for activation. Any ideeas why ? RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - Jerome - 28-11-2018 Same problem at 7.74, any solutions? thx |