DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56) +---- Thread: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) (/showthread.php?tid=24161) |
RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - greemans - 30-11-2018 (09-05-2017, 21:31 PM)Simple Wrote: Attached is a Magnet link which includes DiagBox 7.01/02 + Updates -> 7.82 + B/C Firmware + Drivers + Tools. Hello, The magnet link you posted doesn't work anymore...Can u make another one or upload to mega? Thanks in advance! RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - Simple - 01-12-2018 It works, I just checked it. You must have missed a character or included extra spaces. RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - Citroën - 03-12-2018 Hello, I have succesfull instal to V 7.82 RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - Jerome - 03-12-2018 Any idea for activation at 7.74? thank you RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - Citroën - 04-12-2018 I don't needed that, only password's and they are in the text-file. They latest update is the other password, directly from a usb stick it wont work for me, constanly error , then i have copy the update-files on the laptop C drive, then the update to 7.82 and it work perfectly RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - Melup - 09-12-2018 Hello everyone, I am new to this forum and I am delighted to participate. I bought this cable and I do not know if it is compatible with firmware version v4.3.5 to use DiagBox v8.45. Will it be compatible? RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - 308sw2014 - 30-12-2018 Hi I used pp2000 and diagbox for a 307 CAN for years. Want to use it for 308 T9. Need at least diagbox 7.57. Intalled diagbox, VIN is automatically read from the car. So everthing seams to be fine. But I can't start the diagnostics or repair application. When I click on it nothing happens. So any ideas??? Running on XP professional laptop. Interface checker detects a B version. RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - ianatkinson1509 - 12-03-2019 hi i havent got a lexia 3 interface but i do have a J2534 pass through device will this work with diagbox thanks in advance RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - kugawai - 16-07-2019 I have a problem, when i run diagbox, say EngineDll.dll not found. I reinstall, and same. Thanks RE: DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) - tintin2005 - 14-09-2019 (09-05-2017, 21:31 PM)Simple Wrote: Attached is a Magnet link which includes DiagBox 7.01/02 + Updates -> 7.82 + B/C Firmware + Drivers + Tools. It includes: Hello. Can this procedure be applied to a chinese clone untouched lexia interface? Without doing any other procedures? It will turns into " a genuine one"? thanks in advance tintin2005 |