2.2 transit 2010 non start afer enine swap - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69) +---- Thread: 2.2 transit 2010 non start afer enine swap (/showthread.php?tid=25358) |
2.2 transit 2010 non start afer enine swap - moiloon - 24-06-2017 Just had a friend round and hes having issues on a 2010 2.2 transit non start after enginge replacement scanned with autocom and got dtc trouble code P268b high pressure fuel pump not calibrated, no symptom obviously not experts on fords and never came across this prior to now original injectors are in the new engine, but the fuel pump was already on the new lump any ideas how to get this motor to start is it a case of IDS needed to recode pump + injectors??? RE: 2.2 transit 2010 non start afer enine swap - Remap Ross - 25-06-2017 Yes every thing shares same code,so if original injectors fitted in same order as last engine =ok pump not coded if new = not ok original ecu=ok ids can code this....not sure on others....or if old pump works and you no ids tool fit old pump thanks and rep if this helps |