EASYCONNECT BMW and E-Sys - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: EASYCONNECT BMW and E-Sys (/showthread.php?tid=25383) |
EASYCONNECT BMW and E-Sys - ipcsr76 - 26-06-2017 Hello, Who can help me for downloading, installing and configure correctly Easyconnect 32 bit, please. I can't connect my ICOM OEM or E-net cable with E-Sys.... And where i past the PsdZ data in E-Sys folder? I have generate PsdZ lite with Psdz tools in C:\data, from Ista/P 3-61-5-000 Thanks a lot. RE: EASYCONNECT BMW and E-Sys - darthur90 - 26-06-2017 Try to use iToolRadar. IMO it it mch easier to use than easy connect. for psdz there is a folder in c:\data called psdzdata. you should copy psdz lite there. RE: EASYCONNECT BMW and E-Sys - sebastianfernandes - 26-06-2017 Download link for latest Easy Connect http://cartechnology.co.uk/showthread.php?tid=6167 RE: EASYCONNECT BMW and E-Sys - petersamer012 - 26-06-2017 You must have itool radar you connect icom to car and run itool radar click reserve. after run esys pro or premium click open connection and click icom you write tcp://169.254.92.38:50160 is for me exemple ip adress which show in itool radar. or try easyconnect type remote IP you exemple 169.254.92.38 mode OBD ab625 click icom lock and check run esys conect via icom tcp://169.254.92.38:50160 after you finish everything you have click icom unlock click check done RE: EASYCONNECT BMW and E-Sys - ipcsr76 - 27-06-2017 (26-06-2017, 15:19 PM)sebastianfernandes Wrote: Download link for latest Easy Connect Thanks for the link.... But, my WIN7 is in 32 bits... This version, is for 64 bits Who have a link for 32 bits version, please... Thanks a lot RE: EASYCONNECT BMW and E-Sys - MaxBmw - 27-06-2017 Hi, check................ |