+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: 080D0WQ or M35080 reliable source (/showthread.php?tid=25535)
080D0WQ or M35080 reliable source - Fraz - 03-07-2017
Hi all,
Just a quick one, where do you guys normally buy your chips from? (080D0WQ/M35080) I have tried a few suppliers from China and the chips havent worked.
Looking for a place where I can buy some for a reasonable price but that do actually work
Thanks,
Fraz
RE: 080D0WQ or M35080 reliable source - rs@chip - 03-07-2017
(03-07-2017, 10:03 AM)Fraz Wrote: Hi all,
Just a quick one, where do you guys normally buy your chips from? (080D0WQ/M35080) I have tried a few suppliers from China and the chips havent worked.
Looking for a place where I can buy some for a reasonable price but that do actually work
Thanks,
Fraz
you have a site advertised here on forum..but you can also erase them with good r270 programer..I didnt buy them for 3years now..always erase them
RE: 080D0WQ or M35080 reliable source - Fraz - 03-07-2017
I mostly end up with the v6 versions so can't erase them.
RE: 080D0WQ or M35080 reliable source - autoraedarum - 06-07-2017
Have the same iusses with china chips, have buy in germany http://www.chip-service.de/product_info.php?info=p489_M35080-MN6.html, but price is higher
RE: 080D0WQ or M35080 reliable source - eliaselias - 07-07-2017
Here is a link for real chip from china
read erase and write work 100%
chip price about 3$
RE: 080D0WQ or M35080 reliable source - Sabreace - 07-07-2017
Better buy in Germany, good Quality had higher Price but make no Headache
RE: 080D0WQ or M35080 reliable source - eliaselias - 07-07-2017
(07-07-2017, 21:20 PM)Sabreace Wrote: Better buy in Germany, good Quality had higher Price but make no Headache
they are both made in china
i am not making advertisement but if you can pay half price for the same job..why not!!!