CarTechnoloGY
Help about Mercedes W210 EIS wiring on board - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Help about Mercedes W210 EIS wiring on board (/showthread.php?tid=25937)



Help about Mercedes W210 EIS wiring on board - savoy81 - 18-07-2017

Hello
i wanted to try w210 eis on board i connected +12 and GND as pic below the light on the coil chick worked fine but the key not turned is that the right way to connect it
by the way i'm using just EIS without to connect ESL and connect just +12 and GND wire and there is another line which marked k-line should i connect it if yes where ?
thank you


RE: Help about Mercedes W210 EIS wiring on board - sqlkarol - 18-07-2017

Hi
Connect ESL or emulator.


RE: Help about Mercedes W210 EIS wiring on board - savoy81 - 22-07-2017

(18-07-2017, 16:23 PM)sqlkarol Wrote:  Hi
Connect ESL or emulator.

thank you