【Unsolved】Need FULL BDM Citroen c4 1.6hdi - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: 【Unsolved】Need FULL BDM Citroen c4 1.6hdi (/showthread.php?tid=25940) |
【Unsolved】Need FULL BDM Citroen c4 1.6hdi - Gabriel130592 - 18-07-2017 Hello guys! I need FULL BDM or EEPROM read for this car: Citroen C4 year 2007 Engine 1.6 hdi 90hp. ECU Bosch EDC16c34 HW: 0281011863 SW: 1037380727 Thanks in advance! Regards RE: Need BDM Citroen c4 1.6hdi - rch11 - 18-07-2017 (18-07-2017, 11:40 AM)Gabriel130592 Wrote: Hello guys!Try RE: Need BDM Citroen c4 1.6hdi - Gabriel130592 - 21-07-2017 Sorry, your file not is read by BDM. Please, I need BDM for this car Thanks in advance! Regards RE: 【Unsolved】Need BDM Citroen c4 1.6hdi - CHIKODIAG - 21-07-2017 HI YOUR FILL GOOD LUCK RE: 【Unsolved】Need BDM Citroen c4 1.6hdi - Gabriel130592 - 26-07-2017 Hi! I have programmed the flash by BDM but I still see the DTC P1600. It seems that the Eeprom has been deprogrammed. I need file READ EEPROM or FULL BDM for this car ... Thanks in advance! Regards RE: 【Unsolved】Need FULL BDM Citroen c4 1.6hdi - betrescudan - 26-07-2017 (26-07-2017, 12:13 PM)Gabriel130592 Wrote: Hi! if car started...need to recode injectors RE: 【Unsolved】Need FULL BDM Citroen c4 1.6hdi - Gabriel130592 - 26-07-2017 No, car not started... Any Read Eeprom? RE: 【Unsolved】Need FULL BDM Citroen c4 1.6hdi - LE RETOUR - 26-07-2017 My friend i hqve the sqme problem but i think your problem is in flash its 2M by bdm or obd its the same its not problem of eeprom its the correct soft you need answer me friend if the starter work when you cranck using that file flash please respond and eeprom 0281011863 immo off try the two file and car will start RE: 【Unsolved】Need FULL BDM Citroen c4 1.6hdi - Gabriel130592 - 26-07-2017 (26-07-2017, 12:54 PM)LE RETOUR Wrote: My friend i hqve the sqme problem but i think your problem is in flash its 2M by bdm or obd its the same its not problem of eeprom its the correct soft you need answer me friend if the starter work when you cranck using that file flash please respond I have already tested with a flash read by BDM and programmed by bdm also ... My problem is in the EEPROM Does anyone have the reading of the eeprom or FULL BDM? RE: 【Unsolved】Need FULL BDM Citroen c4 1.6hdi - LE RETOUR - 26-07-2017 MY friend gabriel believe me i use always one eeprom read off for all ed16c34 but in c4 with that reference just use my files flash and eeprom write flash by obd and eeprom desolder it one advice if you use another reference of ecu and its not 0281011863 the steering whell will not work its tested two reference will work completly in that car 90 hp and 110 hp 9HX AND 9HY JUST try my files and tell me |