+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: DIGIPROG 3 user help thread ! (/showthread.php?tid=261)
RE: DIGIPROG 3 user help thread ! - Avtoprofi - 23-01-2014
(23-01-2014, 09:27 AM)tridh Wrote: I get many of the sofware like etka,elsa,wis,xentry for "free"...
I pay for the digiprog and the cables...
But the price for update about 300 USD for 4.88 is to high, for 300 USD i get a new digiprog...
Is the digiprog Community to small ?
Where did the sellers get the updates from?
Pay about 50-100 USD for the 4.88 or 4.92 is ok, but not much more...
I dont think that you will find digiprog 4.88 for 300$, they make the update and if you need it you must pay that price, when you not need it so quick than waith that the chinese sell the update for 50-60$
RE: DIGIPROG 3 user help thread ! - P206gti - 26-01-2014
Hi I have some questions : vw passat b6 2008 - there is
1. 24c32/servicemode
2. Tacho diag c32
Tacho diag c32/c64
Diag color
Service
Can you please explain why there is number 1 and 2 when there is tacho diag c32/c64???
Witch one of them should I use??? Can I just pick tachodiag c32/c64 and everything is ok?
What is diag color?
Same thing is on vw golf 6 but there is also tacho MM7 hcs12
Where do I get one hcs12 ??? And how do I know it's a mm7 that needs hcs12?
Look at the meny yourself and help me out with this please
Have anyone done Audi a6 2011? Vw passat 2010 ? Or vw golf 2011 ?? If yes how did you do in steps
Thank you guys for sharing your brains
Please help me
RE: DIGIPROG 3 user help thread ! - Dash_Burner - 30-01-2014
Did anybody used digiprog to correct milleage in chevrolet Matiz car ? I tried to correct milleage using instructions but i didn't...
RE: DIGIPROG 3 user help thread ! - P206gti - 30-01-2014
Hi does anybody know if digiprog 3 4.85 supports Volvo c70?
RE: DIGIPROG 3 user help thread ! - P206gti - 06-02-2014
Hey can anyone help me? I bought digiprog and I noticed that i dont have the cable 62 and cas diagnosis cable ???
I looked and I have got something st-bmw ? Does anyOne know what this is ? What cable do I need for bmw 3er e90 cas Weiss diagnose and schwarz diagnose ?
Please help
RE: DIGIPROG 3 user help thread ! - octav_kiss - 13-02-2014
My experience with digiprog 3
golf 4 all
audi a3 dead taho 999999 but ripair vith digiprog 3
audi a4 1995-2001 vdo-ok
vw t5-2008-ok
skoda fabia-ok
octavia ok
audi a6-2005-2009-ok
bmw 320 1998-1999-ok obd
vw golf 5-2004-20080obd ok
audi a4 2004-2011 obd ok
vw cady-2007 obd ok
vw cady edc16-obd ok
vw t5 edc 16 -obd ok
seat ibiza-2001-2011 obd ok
vw tiguan 2010 obd ok
bmw 320 1999 obd ok
ford mondeo with hc 12 --clip ok
octavia 2008-obd ok
octavia edc 16-obd ok
passat 2011,edc16,getriebe+service reset obd ok
opel corsa not work ok
astra g work
vectra-ok
vw passat 2001-obd ok
opel astra g -via clip -35080 work in circuit ok
ford galaxy 2005 not work with obd
ford mondeo 2004-2010 obd ok
seat leon 2010 obd ok
audi a2 2000-2004 obd ok
vw touram 2005-obd ok edc 16 ok
vw bora-1999-2005 obd ok
I have a question
Does anyone driver for digiprog 3??
another question...Does anyone know how I can use the function to change km to edc 16 audi a4-audi a6 2004-2006???
I tried the function edc 16 vw touran,vw passat 2004-2008.
read correctly but does not change km.
someone used bmw cas 2 or 3?work ok?
it is possible to save the data read by OBD?
Thank.wait a response
RE: DIGIPROG 3 user help thread ! - jaybee2901 - 13-02-2014
Hi there new to this forum, so hi everyone!
Have experience with digiprog but no luck on vectra
2005 93c66 " chip not found"
Has anyone come accross this and found a way of doing vectra c?
Regards
RE: DIGIPROG 3 user help thread ! - tzveti_b - 14-02-2014
Hi, I have a question about Dodge Ram 2004, the chip into dash is ST92F150JDV1QC. Digiprog 3 wants plug-53!? I don't have plug-53, any ideas? It suppose to be supported by OBD2?
RE: DIGIPROG 3 user help thread ! - jaybee2901 - 14-02-2014
Hi there new to this forum, so hi everyone!
Have experience with digiprog but no luck on vectra
2005 93c66 " chip not found"
Has anyone come accross this and found a way of doing vectra c?
Regards
RE: DIGIPROG 3 user help thread ! - neo123 - 18-02-2014
Hi
Does anyone know if digiprog 3 can do avensis 2010 version.[/size]