VCDS 17.8.1 MULTILANGUAGE FULL - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: VCDS 17.8.1 MULTILANGUAGE FULL (/showthread.php?tid=26509) |
RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 12-03-2018 (11-03-2018, 12:15 PM)mista Wrote: Hi guys i have a vcds from this website http://www.obdkcan.com/vagcom-1684-v...711_p1272.html maybe firmware problem or bricked... solution : reflash atmega and eeprom (maybe FTDI) RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 13-03-2018 Hi Guys ! new loader 6.2 is available ! changelog : Small improvements in Loader package V6.2 - VAGCOM_EEWriteLang sometimes failed - Improved Loader for x64 - Other stuff is same edit :link deleted, problem with this loader. RE: VCDS 17.8.1 MULTILANGUAGE FULL - mikroel - 13-03-2018 (13-03-2018, 10:35 AM)ZIPPO4594 Wrote: Hi Guys ! Don't use this !!!Not good removed by developer Use V6.3 - VAGCOM_EEWriteLang sometimes failed - Improved Loader for x64 and older VCDS versions - Other stuff is same BR RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 13-03-2018 Could you post link of 6.3 Loader ? tkz a lot RE: VCDS 17.8.1 MULTILANGUAGE FULL - spoon63 - 13-03-2018 Small improvements in Loader package V6.3 - VAGCOM_EEWriteLang sometimes failed - Improved Loader for x64 and older VCDS versions - Other stuff is same Rule 3: Do not Post Links on the Board! External links to files must be attached in a notepad file. Thanks, Admin Like this RE: VCDS 17.8.1 MULTILANGUAGE FULL - mack0r - 15-03-2018 Hello, i have vcds cable 17.1.3 PL And works fine. Can i use 17.8.1 PL in this cable? Which loader? Can i use 18.2.0 EN in this cable? Which loader? I must update interface? RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 15-03-2018 (15-03-2018, 05:16 AM)mack0r Wrote: Hello, i have vcds cable 17.1.3 PL And works fine. could you post picture of your pcb cable ? RE: VCDS 17.8.1 MULTILANGUAGE FULL - mack0r - 16-03-2018 Take friend . RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 16-03-2018 Ok, you can use 17 and 18 vcds version, but you must flash with usbasp programmer (atmega, eeprom and maybe ftdi) Loader version depend of vcds version. If you flash with 18.x, you must use 6.3 loader (last version by Kolimer) First, you must identfy hardware of your cable (h044 or h046) RE: VCDS 17.8.1 MULTILANGUAGE FULL - barto39 - 23-03-2018 (16-03-2018, 20:00 PM)ZIPPO4594 Wrote: Ok, you can use 17 and 18 vcds version, but you must flash with usbasp programmer (atmega, eeprom and maybe ftdi) Hello ZIPPO4594 A question if we use flash with usbasp for atmega, eeprom, the ftdi with which program are used to flash the FTDI ?????(Some tutorial how to flash the FTDI????) Thanchs |