VCDS 17.8.1 MULTILANGUAGE FULL

VCDS 17.8.1 MULTILANGUAGE FULL - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: VCDS 17.8.1 MULTILANGUAGE FULL (/showthread.php?tid=26509)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

RE: VCDS 17.8.1 MULTILANGUAGE FULL - andrei3333 - 08-04-2018

The link to loader 6.3 is not working. Could you please restore the link

RE: VCDS 17.8.1 MULTILANGUAGE FULL - Silverblue - 09-04-2018

(08-04-2018, 19:12 PM)andrei3333 Wrote: The link to loader 6.3 is not working. Could you please restore the link

I confirm the link isn't working any more please re-upload the loader 6,3

RE: VCDS 17.8.1 MULTILANGUAGE FULL - engy - 09-04-2018

(09-04-2018, 01:13 AM)Silverblue Wrote:
(08-04-2018, 19:12 PM)andrei3333 Wrote: The link to loader 6.3 is not working. Could you please restore the link

I confirm the link isn't working any more please re-upload the loader 6,3

RE: VCDS 17.8.1 MULTILANGUAGE FULL - skymastor - 09-04-2018

Just want to thank everyone who has shared, contributed and gave valuable Info on this post. It's very interesting and I've learned a lot reading through the comments.

I've identified that my own interface is one of those NEC Chinese pieces of crap and I will now have to search for a new interface to practice all the good stuff you guys have posted here. Any suggestions where I could get a good quality Interface from would be greatly appreciate.

Thanks guys and well done for this outstanding post.

Regards.

Sky yes

RE: VCDS 17.8.1 MULTILANGUAGE FULL - matik185 - 12-04-2018

Chip Enable Program..
What im doing bad ?
Someone knows ?
Maybe someone have photos to confirm my connections to MCP2515

Never mind - wrong wire connection.
Everything perfect.. writed flash, eeprom.. OK
Next updated VAGCOM _ EEWriteLang - Polish - OK via USB
Installed 17.8.1 from Adako - Test connection - Firmware update - OK
Testing now and seems to be ok but...
K1 OK
K2 OK
Can not ready..
Is it writed Can not ready because im testing it on bench with Power supply.. Dont have car to test today ??

RE: VCDS 17.8.1 MULTILANGUAGE FULL - kayne31 - 03-05-2018

I have this interface. I want to create a dump from STM32. Is that possible? I think so you can circumvent vin limitation.

RE: VCDS 17.8.1 MULTILANGUAGE FULL - ProLight - 11-05-2018

Hello, everything works for me, thank you for throwing. but after the tests I found some error: it is written here: required conditions were not met or command sequence error

RE: VCDS 17.8.1 MULTILANGUAGE FULL - pepeEL - 16-05-2018

Hi
I flashed my VCDS 0x46 with latest dump and then use VCDSLoader v6.3 but i test it in my friend VW Passat 2009 and long codding not working. Example i unchecked in Parkhilfe optical illustration then codding. I get info Codding succes and then go and still optical illustration is checked. Also test on other modules and the same problem. I use it with Polish VCDS 18.2.1
Is anybody who can also test it ?

RE: VCDS 17.8.1 MULTILANGUAGE FULL - kas-fearless - 18-05-2018

Wondering if someone can help me. When i connect my clone and click on EE read comes up with no response. Powered it by 12v and connected to usb https://ibb.co/ctk3vo

https://ibb.co/ksvYT8

RE: VCDS 17.8.1 MULTILANGUAGE FULL - marius16 - 19-05-2018

Hi, i can program this:

I think it is NEC+FT232RL 12.12.
Thanks.