CarTechnoloGY
VCDS 17.8.1 MULTILANGUAGE FULL - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: VCDS 17.8.1 MULTILANGUAGE FULL (/showthread.php?tid=26509)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

RE: VCDS 17.8 MULTILANGUAGE FULL - DTech - 08-08-2017

Always first remove stc crap chip before anything.

RE: VCDS 17.8 MULTILANGUAGE FULL - Szokimoki - 09-08-2017

(08-08-2017, 21:57 PM)DTech Wrote:  Always first remove stc crap chip before anything.

Remove forever or after programing put back?

RE: VCDS 17.8 MULTILANGUAGE FULL - gyozo75 - 09-08-2017

ProgIsp & TL866 Project archive error?I can't open.

L.E:I used 7Zip working fine.

RE: VCDS 17.8 MULTILANGUAGE FULL - moiloon - 09-08-2017

No one got a video tutorial to help all of us who are inferior and never done this before
gotta be easier also for the gurus than answering lots of questions
after all a picture/video speaks a thousand words

RE: VCDS 17.8 MULTILANGUAGE FULL - pica14 - 09-08-2017

Hello
I have tried to update it by usb and the program usb performs it and it puts OK

Install the program orifginal 17.8 change the loader
I start the program I give to test it puts me test ok but you have to update the firmnware since I have 1.95 and 1.96 is necessary

I give it to update
Start
But I get the message
Unable to update
And I have to cancel
any solution?

RE: VCDS 17.8 MULTILANGUAGE FULL - Marcos - 09-08-2017

(09-08-2017, 16:45 PM)pica14 Wrote:  Hello
I have tried to update it by usb and the program usb performs it and it puts OK

Install the program orifginal 17.8 change the loader
I start the program I give to test it puts me test ok but you have to update the firmnware since I have 1.95 and 1.96 is necessary

I give it to update
Start
But I get the message
Unable to update
And I have to cancel
any solution?

Is your VCDS with RL-RQ chips?

RE: VCDS 17.8 MULTILANGUAGE FULL - pica14 - 09-08-2017

(09-08-2017, 18:27 PM)Marcos Wrote:  [quote='pica14' pid='265558' dateline='1502297109']
Hello
I have tried to update it by usb and the program usb performs it and it puts OK

Install the program orifginal 17.8 change the loader
I start the program I give to test it puts me test ok but you have to update the firmnware since I have 1.95 and 1.96 is necessary

I give it to update
Start
But I get the message
Unable to update
And I have to cancel
any solution?
This is mine interface
Hw 0x44 firmware 1.95


Rl is my chip

RE: VCDS 17.8 MULTILANGUAGE FULL - Szokimoki - 09-08-2017

(09-08-2017, 19:36 PM)pica14 Wrote:  I give it to update
Start
But I get the message
Unable to update
And I have to cancel
any solution?

This is mine interface
Hw 0x44 firmware 1.95


Rl is my chip
Same like mine
Same problem, same parts

RE: VCDS 17.8 MULTILANGUAGE FULL - DTech - 09-08-2017

Try on another system to update or if fails then classic method by programmer

RE: VCDS 17.8 MULTILANGUAGE FULL - Szokimoki - 12-08-2017

(09-08-2017, 20:45 PM)DTech Wrote:  Try on another system to update or if fails then classic method by programmer
I tried with a TL866A programmer.
Failed! Pin or connection problem.
Sold it to Atmega 162?! To just one pin?! laughing

Only the best ones are trying!