VCDS 17.8.1 MULTILANGUAGE FULL - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: VCDS 17.8.1 MULTILANGUAGE FULL (/showthread.php?tid=26509) |
RE: VCDS 17.8.1 MULTILANGUAGE FULL - papito56 - 22-12-2018 . If you like my post press If my post has resolved your issue press post press Thanks press reputation !!!!!!!!! RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 26-12-2018 Vcdsloader V7.2 tested with vcds 18.9 FRM, works perfectly Many thanks to Kolimer (and papito56 for the link) ! Anybody knows the changelog of this new loader ? RE: VCDS 17.8.1 MULTILANGUAGE FULL - Xfiles_de - 31-12-2018 @ZIPPO4594 Vcdsloader V7.7 ? RE: VCDS 17.8.1 MULTILANGUAGE FULL - belkor - 31-12-2018 (31-12-2018, 10:53 AM)Xfiles_de Wrote: @ZIPPO4594 he means 7.2 RE: VCDS 17.8.1 MULTILANGUAGE FULL - Xfiles_de - 31-12-2018 So no problems with the new 18.9? have read somewhere that it comes to problems with loader 7.2 RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 01-01-2019 (31-12-2018, 10:53 AM)Xfiles_de Wrote: @ZIPPO4594 Sorry, message edited RE: VCDS 17.8.1 MULTILANGUAGE FULL - cebbes30 - 21-01-2019 Hello, Guestion when i connect the cable in to my car and run HW type no response. After vcds loader V1 hw write it says no boatloder. Can any one help. I have clone 15.7 version red elektroniks component RE: VCDS 17.8.1 MULTILANGUAGE FULL - BS68 - 28-01-2019 Hi friends ☆Papito56☆ thank you for sharing, I own the "HEX V2" 17.8FR multilanguage, my mission is to see if it is possible to upgrade USB to have the 18.9 version, i would share the result, Full reputation for ☆Papito56☆ Thank you very much for your friends. RE: VCDS 17.8.1 MULTILANGUAGE FULL - foxik33 - 02-02-2019 Anything can be done to this cable ? Got it as 18.9, but official software won't recognize this device. RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 05-02-2019 Yes, you can upgrade it with USBsap programmer (wires must be soldering on J3) |