+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: VCDS 17.8.1 MULTILANGUAGE FULL (/showthread.php?tid=26509)
RE: VCDS 17.8.1 MULTILANGUAGE FULL - foxik33 - 05-02-2019
(05-02-2019, 14:50 PM)ZIPPO4594 Wrote: Yes, you can upgrade it with USBsap programmer (wires must be soldering on J3)
Any more info about that.
I do have CH341A programmer.
RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 06-02-2019
I don’t know this programmer, but it must be wired like this :
RE: VCDS 17.8.1 MULTILANGUAGE FULL - foxik33 - 07-02-2019
(06-02-2019, 14:43 PM)ZIPPO4594 Wrote: I don’t know this programmer, but it must be wired like this :
GND ?
18.9 dump available somewhere ?
RE: VCDS 17.8.1 MULTILANGUAGE FULL - ZIPPO4594 - 07-02-2019
for the loader and all prog files, see Post: #381
RE: VCDS 17.8.1 MULTILANGUAGE FULL - madado159 - 08-02-2019
Hello
I have this vcds clone, and I need the schematics, if anyone has it, I'll be greatfull.
It has FT232RL chip. other components appear clearly in pictures.
RE: VCDS 17.8.1 MULTILANGUAGE FULL - BS68 - 08-02-2019
Hello friends Many thanks to Dtech for sharing.
I own the Hex V2 17.8.1 not flash as on the images, wanting to make a diagnosis on a Touareg 1st generation (2005) the autoscan to work well (less than 10 minutes).
After a few failures i wanted to delete its failures using "clear errors" during the end of the removal the screen of the PC became black
i did not know how to do, waited a few minutes but nothing to do the screen of the PC is to remain black.Finally i cut the contact and exit the cable of the port OBD2 After a test of starting the vehicle to start without problem on the PC, i have other softwares like VCP, Diagbox, Renolink and Wow.
Is what is the cause of the problem?
If you like, can you tell me what produces this black screen?
Thank you so much.
RE: VCDS 17.8.1 MULTILANGUAGE FULL - lanman - 09-02-2019
Hello!! I bought a HEX-V2 cable from a Chinese site with FT232RQ and Atmega162 chip.
The CD was damaged and I cant use it. The dealer said that has 18.2 version.
So I don't know where I can find the compatible VCDSLoader.
It is possible to update to the latest 18.9? If yes how can I do this?
I will attach some pictures.
Thank you for all.
RE: VCDS 17.8.1 MULTILANGUAGE FULL - BS68 - 09-02-2019
(09-02-2019, 08:51 AM)lanman Wrote: Hello!! I bought a HEX-V2 cable from a Chinese site with FT232RQ and Atmega162 chip.
The CD was damaged and I cant use it. The dealer said that has 18.2 version.
So I don't know where I can find the compatible VCDSLoader.
It is possible to update to the latest 18.9? If yes how can I do this?
I will attach some pictures.
Thank you for all.
Hi lanman,
I have the same card visible on the picture above, the only difference between the 2 is the chip CAN
Last night i installed the software Kolimer V7.2 by USB simply. First i made an obd2 cable to power the target board. I cut a cable obd2 coter male and female, with the coter i solder the solder on pins 4-5 for GND or ground and 16 for + 12V to a adapter 220V to 12V 1A.
Find and download Kolimer V 7.2, open the files, (install drivers) choose EEWright ...? or similar and open it, plug your card into USB and OBD2 with 12V adapter. verifier and flash directly
After you have to open another file (i do not have the name in memory) it is a file to read the chip Atmega162 to confirm the flash and you will see version 1.95.
You must open the VCDS program to update to 1.96 so your cable will be OK for different versions. I also do the same process with a map called AES mode and success.
Thanks and respect to Kolimer for free sharing, men like Kolimer are rare. Desolate for the english of the translator
all this talks to tell you what you can without problem, the version is 0x46. Good work.
RE: VCDS 17.8.1 MULTILANGUAGE FULL - lanman - 10-02-2019
Thank you so much for your reply BS68!!
I think it’s difficult for me to do all this because I don't have this experience.
Do you have any guide like DIY with photos whit whole process?
Do I have to purchase a USB programmer?
Can you share some pictures from your update process and the obd2 cable?
I found the version from my cable.
Is 1.96 with bootloader enabled.
Can I use VCDSLoader 7.2 with the latest 18.9 or i will lock my cable?
RE: VCDS 17.8.1 MULTILANGUAGE FULL - venix - 16-02-2019
Hey, does somebody know this device?
can i flash it with kolimers over usb?
Now i have the problem that it cant get recognized per usb
unable to read config index 0 descriptor/start: