Clio IV abs component damage. - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: Clio IV abs component damage. (/showthread.php?tid=27059) |
Clio IV abs component damage. - fulas - 22-08-2017 Hello , I need help with this module , When I cut the plastic case I broke two components that look like SMD pulse tranformer. RE: Clio IV abs component damage. - pica14 - 23-08-2017 You need abs module by donor car and clonar eprom data RE: Clio IV abs component damage. - fulas - 23-08-2017 (23-08-2017, 07:00 AM)pica14 Wrote: You need abs module by donor car and clonar eprom dataThat components are coils, they aren't eproms.They are similar these one SMD RE: Clio IV abs component damage. - alfabit - 24-08-2017 Get a sh abs module and keep eeprom from original or replace the broken coils RE: Clio IV abs component damage. - fulas - 24-08-2017 I am close to find the answer , they are Chokes for automotive CanBus https://www.digikey.com/en/product-highlight/p/pulse-electronics/common-mode-choke-2-line-can-bus-aec-q200 And here a schematic for common CAN-bus implementation RE: Clio IV abs component damage. - rs@chip - 27-08-2017 (24-08-2017, 17:09 PM)fulas Wrote: I am close to find the answer , they are Chokes for automotive CanBus yes mate you are right..this are used for can and you can find those in any newer can based module and/or cluster..usualy we remove them when mount can filter..I have them on mmy desk..so no need to change abs yust becouse of this look on pic same thing..... |