+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Solved ✔ EDC16CP31 dpf egr off (/showthread.php?tid=27083)
EDC16CP31 dpf egr off - Selectronic - 23-08-2017
Hi mates ,
Need good DPF and EGR off (with egr , temp. and Diff press sensor conectors OFF)
ADS software not working well!
Thank you!
MB Vito W639 , 3,0 cdi 150kw , EDC16CP31
Bosch 0 281 015 304 , 1037501624
..................................................................
I'm getting crazy now. EGR valve is damaged and Diff press sensor also.
Have P2078 - Diff press sensor shortcut
P2511 - EGR valve shortcut
I try to disable those DTC's and working for sometime then LIMP mode
RE: EDC16CP31 dpf egr off - Selectronic - 24-08-2017
Anyone please??!
Damos can help also!!
RE: EDC16CP31 dpf egr off - mariux0510 - 24-08-2017
Try this file
RE: EDC16CP31 dpf egr off - Selectronic - 24-08-2017
Thanks for reply but not working.
Limp mode from start. Did you use software or done it by manual (winols) ??
RE: EDC16CP31 dpf egr off - mariux0510 - 24-08-2017
Try other solution
RE: EDC16CP31 dpf egr off - Selectronic - 24-08-2017
Not working
this is software 1037508974 and car cannot start
try to change only moded adresses for EGR and DPF but still not working
RE: EDC16CP31 dpf egr off - mariux0510 - 24-08-2017
Maybe need disconnect EGR plug and check fuses if EGR actuator shorted
. What show fault codes?
RE: EDC16CP31 dpf egr off - Selectronic - 24-08-2017
SOLVED!
Problem was in f...n checksum. Somebody tried to turn EGR before in "switch solution"
Found original ECU file and solved thing!!!
Thank you Mariux for you help. All conectors are disconected