VVDI PROG Support/Feedback Thread - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: VVDI PROG Support/Feedback Thread (/showthread.php?tid=27259) |
RE: VVDI PROG Support/Feedback Thread - raffy haddad - 10-06-2017 Hi usually no adapter need just usb cable from pc And in case in reading need adapter te software automatically Tells you Regards RE: VVDI PROG Support/Feedback Thread - MaxBmw - 10-06-2017 (10-06-2017, 15:17 PM)atak Wrote: Driver installation complete 12v VVDI PROG Support/Feedback Thread - bmw335coding - 11-06-2017 (10-06-2017, 15:17 PM)atak Wrote: Driver installation complete12V, but its not required for all. I think only for some processors and ECUs. Problem is the power supply is not in package when you bought it. But you can use psu from other 12V tools like k-tag, r270 and so one. RE: VVDI PROG Support/Feedback Thread - BMWS1000RR - 12-06-2017 I use the PSU that was with the KTAG and it works great. It is only needed when certain MPU's are read or write to. The provided instructions to the right usually indicate if 12V is required to read or write. Can the OP please indicate when UNLOCK support for the 9S12G128 is going to be provided on SECURE mode MPU. Unsecured Mode is already provided but on BMW EWS4 motorrad it is locked. Please provide unlocking support of this MPU. RE: VVDI PROG Support/Feedback Thread - raffy haddad - 27-06-2017 Hi all Today eis w220 with 4j74y not crack chip RE: VVDI PROG Support/Feedback Thread - MaxBmw - 27-06-2017 Hi, You checked older ver 4.5.7 ? RE: VVDI PROG Support/Feedback Thread - raffy haddad - 27-06-2017 Hi no i didn't try it on 4.5.7 I formatted my computer so i have only 458 Did you try it ? Regards RE: VVDI PROG Support/Feedback Thread - MaxBmw - 27-06-2017 Yes, because there are some mistakes a lot of people are writing about with this new version RE: VVDI PROG Support/Feedback Thread - raffy haddad - 27-06-2017 I will try to find tomorrow 4.5.7 and report Thanks RE: VVDI PROG Support/Feedback Thread - MaxBmw - 27-06-2017 Please check............ |