+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: VVDI PROG Support/Feedback Thread (/showthread.php?tid=27259)
RE: VVDI PROG Support/Feedback Thread - sadarmeng - 28-06-2017
Where to buy this tools sir? i want to buy it
RE: VVDI PROG Support/Feedback Thread - raffy haddad - 28-06-2017
Hi
I tried to read it again 4j74y on v 4.5.7
Same result can't crack chip
(28-06-2017, 01:48 AM)sadarmeng Wrote: Where to buy this tools sir? i want to buy it
Hi
Just google it and you can reach your purpose
RE: VVDI PROG Support/Feedback Thread - MaxBmw - 28-06-2017
(28-06-2017, 04:47 AM)raffy haddad Wrote: Hihi,
I tried to read it again 4j74y on v 4.5.7
Same result can't crack chip
(28-06-2017, 01:48 AM)sadarmeng Wrote: Where to buy this tools sir? i want to buy it
Hi
Just google it and you can reach your purpose
I wrote in my case to the author how to get some information
send you email
sorry for my english
Regards
RE: VVDI PROG Support/Feedback Thread - MaxBmw - 29-06-2017
NEW UPDATE VVDI prog v4.5.9
v4.5.9 (2017-06-28)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.9 version in Doc folder
* Update polish language
+ Update V850 D-Flash format conversion tool
* Fix STM8 series options error
* Fix MED17.1 option error
* Fix V850E-DG3 diagram error
* Fix ME17.9.11.1 diagram error
* Fix BAOJUN630 diagram error
+ Add MPC5606B, MPC5607B, MPC5602D, MPC5606E, MPC5601P, MPC5602S, MPC5604S options
in <2-MCU>-><MOTOROLA-MPC560XXXX>
+ Add SPC560B50B2, SPC560B64L3, SPC560C40L1, SPC560C50L1, SPC56AP54L3, SPC56AP54L5,
SPC56AP60L3, SPC56AP60L5 options in <2-MCU>-><ST-SPC560XXXX>
+ Add MT60(TC1766) option in <3-ECU>-><DELPHI>
+ Add V3 diagram in <3-ECU>-><DELPHI>-><MT80(TC1766)>
+ Add KESSY(2008--) option in <4-IMMOBILIZER>-><VOLKSWAGEN>
(Need to use with VVDI2,support Touareg, Bentley, A8, Cayenne, Phaeton with kessy module (IMMO4 system) after 2008)
+ Add XC60-REVIEW-MIRROR option in <4-IMMOBILIZER>-><VOLVO>
+ Add SENOVA-D70 option in <5-DASHBORAD>-><BAICMOTOR>
+ Add EXCELLEGT option in <5-DASHBORAD>-><BUICK>
+ Add AVEO option in <5-DASHBORAD>-><CHEVROLET>
+ Add FIESTA option in <5-DASHBORAD>-><FORD>
+ Add K5(2017) option in <5-DASHBORAD>-><KIA>
+ Add FREELANDER(2004) option in <5-DASHBORAD>-><LANDROVER>
+ Add MG3(2016) option in <5-DASHBORAD>-><SAICMOTOR>
+ Add EXCELLEGT-SRS option in <7-ARIBAG>-><BUICK>
+ Add ALSVIN-SRS option in <7-ARIBAG>-><CHANGAN>
+ Add CITY-SRS(MPC5604P) option in <7-ARIBAG>-><HONDA>
+ Add 2008-SRS option in <7-ARIBAG>-><PEUGEOT>
+ Add SRS-VW20LE(SPC560P50L3) option in <7-ARIBAG>-><VOLKSWAGEN>
+ Add A4L-LWR-MODULE(2010), A6L-C6-AMP, A8L-AMB-MODULE(2011), ESL-HC08GR16-V2 options in <8-OTHER>-><AUDI>
+ Add 528-SEAT-MODULE option in <8-OTHER>-><BMW>
+ Add LEW-MODULE option in <8-OTHER>-><VOLKSWAGEN>
RE: VVDI PROG Support/Feedback Thread - 205xad - 12-07-2017
(27-06-2017, 13:52 PM)raffy haddad Wrote: Hi all
Today eis w220 with 4j74y not crack chip
it's easy, check all connections and compare with R270 image files and connect 12V to programmer
i've read more than 5 ezs...all ok
RE: VVDI PROG Support/Feedback Thread - raffy haddad - 13-07-2017
The connection i used from vvdi prog but did not connect 12v adapter
Next time when i had similar eis i will try
Thanks
RE: VVDI PROG Support/Feedback Thread - louis21 - 26-07-2017
VVDI PROG latest software version V4.6.0 update
-------------------------------------
v4.6.0 (2017-07-26)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.0 version in Doc folder
* Change some RENESAS-V850 chips DFLASH size to 64KB
* Fix GM-BCM3 option
* Fix V850E2 series diagrams
* Change KESSY(2008--) diagram
+ Add V850E-SK3H,V850-SJ3H series diagrams
+ Add NM93CS06, NM93CS46, NM93CS56, NM93CS66, FM93CS06, FM93CS46,FM93CS56,
FM93CS66 options in <1-EEPROM&FLASH>-><FAIRCHILD>
+ Add M93S06, M93S46, M93S56, M93S66, ST93CS46, ST93CS47, ST93CS56, ST93CS57,
ST93CS66, ST93CS67 options in <1-EEPROM&FLASH>-><ST>
+ Add D80(ADAPTER), D160(ADAPTER), M350803(ADAPTER), M350806(ADAPTER), M35080V6(ADAPTER),
M35080VP(ADAPTER) options in <1-EEPROM&FLASH>-><ST>(Need M35080/D80 ADAPTER)
+ Add MC9S12HN64_UNSECURED, MC9S12HZ64_UNSECURED, MC9S12HN64_SECURED,
MC9S12HZ64_SECURED options in <2-MCU>-><MOTOROLA-MC9S12>
+ Add ST72321(R/AR)6, ST72F321(R/AR)6, ST72321(R/AR/J)7, ST72F321(R/AR/J)7, ST72321(R/AR/J)9,
ST72F321(R/AR/J)9, ST72521B(R/AR)6, ST72F521(R/AR)6, ST72521B(M/R/AR)9, ST72F521(M/R/AR)9 options
in <2-MCU>-><ST-ST7>
+ Add SPC5606S option in <2-MCU>-><ST-SPC560XXXX>
+ Add ME7.5.20(ST10F275) option in <3-ECU>-><VOLKSWAGEN>
+ Add KESSY(2008--) option in <4-IMMOBILIZER>-><AUDI>
+ Add KEYLESS-ENTRY-MODULE(2009--)option in <4-IMMOBILIZER>-><GM>
+ Add HAVAL-H9-BCM(D70F3632) option in <4-IMMOBILIZER>-><GREATWALL>
+ Add BCM(2009--) option in <4-IMMOBILIZER>-><LANDROVER>
+ Add XINBAO(MC9S08LG16) option in <5-DASHBORAD>-><CHANGAN>
+ Add CRUZE(D70F3423) option in <5-DASHBORAD>-><CHEVROLET>
+ Add DASHBORAD(2013--)(SPC5604S), DASHBORAD(2013--)(SPC5606S), FIESTA(3L16Y),
FOCUS-C-MAX(2009) options in <5-DASHBORAD>-><FORD>
+ Add BESTURN-B70-SRS(D70F3623) option in <7-ARIBAG>-><FAW>
+ Add ACCORD-SRS(SPC56AP54L3) option in <7-ARIBAG>-><HONDA>
+ Add SRS-VW20(SPC560P50L3) option in <7-ARIBAG>-><VOLKSWAGEN>
+ Add A4L-LEW-MODULE(2013) option in <8-OTHER>-><AUDI>
+ Add EVOQUE-EPB-MODULE(2013) option in <8-OTHER>-><LANDROVER>
RE: VVDI PROG Support/Feedback Thread - MILITANTS - 22-08-2017
Hi am trying to read w211 hc12 eis and it's saying chip crack failure, what could the problem I don't
Sent from my ALE-L21 using Tapatalk
(27-04-2016, 11:56 AM)Czozen Wrote: Hi,
Does anyone have this tool (VVDI Prog), and can write something about it?
Does it work as they say?
Do you have any good/bad experiance with it?
Thank you for your opinions!
yah it works like they say you just need to understand it i have been using it for about a month now though i still have some challenges but its better than when i was using orther tools
RE: VVDI PROG Support/Feedback Thread - MaxBmw - 22-08-2017
Hi,
You checked the calls ?
Connect power supply 12v and use cable V3
RE: VVDI PROG Support/Feedback Thread - louis21 - 23-08-2017
Very important
on't lengthen the CLK line and GND-C line!