VVDI PROG Support/Feedback Thread

VVDI PROG Support/Feedback Thread - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: VVDI PROG Support/Feedback Thread (/showthread.php?tid=27259)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

RE: VVDI PROG Support/Feedback Thread - Vojno - 06-09-2019

Next version:
-------------------------------------
v4.8.6 (2019-9-02)
* This version DON't need update firmware
+ Add VVDI PROG USER MUNUAL 4.8.6 version in Doc folder
+ Add ME17.5.22(TC1724)(ADAPTER),
MEVD17.2.4_Exx(N20)(ADAPTER),
MEVD17.2.4_Exx(N20)(ADAPTER),
MEVD17.2.4_Fxx(N20)(ADAPTER),
MEVD17.2.9_Fxx(N20)(ADAPTER),
MEVD17.2.9_Exx(N20)(ADAPTER),
MED17.5.25(TC1782)(ADAPTER),
MED17_5_22(TC1782)(ADAPTER),
MEVD17_2_3(B38)(ADAPTER),
MEVD17_2_K(B38)(ADAPTER),
MEVD17.2.5(ADAPTER),
MEVD17.2.8(ADAPTER),
MEVD17.2.H(ADAPTER),
MEVD17.2.P_Fxx(N20)(ADAPTER),
MEVD17.2_Fxx(N55)(ADAPTER),
MEVD17.2.G(N55)(ADAPTER),
MEVD17.2.6(N55)(ADAPTER)
options in
<10-BOSH-ECU-ADAPTER>-><BMW> (Need BOSH ECU ADAPTER)
+ Add ME17.5.22(ADAPTER), MED17_5_25(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-><VOLKSWAGEN> (Need BOSH ECU ADAPTER)
-------------------------------------

link.txt
File Type:
Downloaded:	32 times
Size:	50 bytes

RE: VVDI PROG Support/Feedback Thread - braticks - 12-09-2019

Can someone please tell me from experience. What cars you can make keys with vvdi full package v6.6.0?

RE: VVDI PROG Support/Feedback Thread - raffy haddad - 12-09-2019

Vvdi 2 you mean ?
Well it has bmw ews . cas .and fem system ( fem not tested by me yet )
Vw old and new 4th and 5th and mqb
Porshe by dump peugeot pin code
And key maker by dump
And remotes generate and few things yet
If that answer your question

RE: VVDI PROG Support/Feedback Thread - vanos batam - 07-10-2019

(04-01-2018, 22:14 PM)volavka Wrote:
(04-01-2018, 08:56 AM)Xhorsesupport Wrote: Firstly,connect the device to the pc,obverse the led light,the red led should light always,the yellow led should blink.if the yellow led doesn't blink,you should change a usb port or pc to have a try.
Secondly,if the yellow led is blinking,please install the driver under the folder "driver",then reconnect USB and check the reading is ok or not

i tried on other pc but same issue
only red light is on ,, the yellow one not blink
USB Cable and drivers are ok .. because i can detect my SN and fw version

Please help

Appreciated

hello friend
i had same issue any advice please...

RE: VVDI PROG Support/Feedback Thread - raffy haddad - 07-10-2019

If it is old version update fw if it need

RE: VVDI PROG Support/Feedback Thread - vanos batam - 08-10-2019

i did all as they says on the net..
same result

RE: VVDI PROG Support/Feedback Thread - raffy haddad - 08-10-2019

Open dispute and return it

RE: VVDI PROG Support/Feedback Thread - Vojno - 09-10-2019

-------------------------------------
v4.8.7 (2019-9-19)
* This version DON't need update firmware
* Fix BOSH ECU ADAPTER READ BUGs
+ Add VVDI PROG USER MUNUAL 4.8.7 version in Doc folder
+ Add R7F701062, R7F701064 R7F701067 options in <2-MCU>-><RENESAS-RH850>
+ Add SCENIC(2007) options in<4-IMMOBILIZER>-><RENAULT>
+ Add E3 options in<5-DASHBOARD>-><CHERY>
+ Add TIGGO5(2014) options in<5-DASHBOARD>-><CHERY>
+ Add 300(2005) options in<5-DASHBOARD>-><CHRYSLER>
+ Add SOUTHEAST-DX3(2016) options in<5-DASHBOARD>-><SOUTHEAST>
+ Add FRM-SRS options in<8-OTHER>-><BMW>
-------------------------------------

link.txt
File Type:
Downloaded:	21 times
Size:	50 bytes

RE: VVDI PROG Support/Feedback Thread - ixot - 24-03-2022

Hi.

Please help me.

I have Seat airbag module

3Q0 959 655 AC

SPC5604PEVLQ6

i use the vvdi programmer.. what protocol need use for read and write the mcu?

Best regards!

RE: VVDI PROG Support/Feedback Thread - komote - 29-03-2022

MCP5604P JTAG protocol