+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: VVDI PROG Support/Feedback Thread (/showthread.php?tid=27259)
RE: VVDI PROG Support/Feedback Thread - Czozen - 03-04-2017
(29-03-2017, 11:23 AM)ValeS Wrote: Small feedback
unlock original BMW 868mhz PCF7945 used key IN-CIRCUIT - ok
read dump from cas3+ 0L15Y - ok,
add key with hitag-2 via dump, write back and key work
Did you remove battery from key to flash it in-circut?
RE: VVDI PROG Support/Feedback Thread - raffy haddad - 04-04-2017
(03-04-2017, 20:58 PM)aniello68 Wrote: Hello friend what have schematic for read chip of cim opel zafira B H
with vvdi?
Thanks
Hi here it is zafira with dg128
RE: VVDI PROG Support/Feedback Thread - ValeS - 11-04-2017
(03-04-2017, 21:40 PM)Czozen Wrote:Yes I have removed the battery.(29-03-2017, 11:23 AM)ValeS Wrote: Small feedback
unlock original BMW 868mhz PCF7945 used key IN-CIRCUIT - ok
read dump from cas3+ 0L15Y - ok,
add key with hitag-2 via dump, write back and key work
Did you remove battery from key to flash it in-circut?
RE: VVDI PROG Support/Feedback Thread - raffy haddad - 20-04-2017
Hi all
A question if i have the ecu connection of bmw bike with bmsx ecu
With inside tricore 1797
And have the vvdi prog and can read the ecu of mevd 17.2 for f series (n55)
My question is it possible to read bmsx ecu tricore 1797 with
The right connection withh vvdi prog using mevd17.2 ecu for bmw car
Regards and thanks
VVDI PROG Support/Feedback Thread - bmw335coding - 21-04-2017
ALL 35080 chips can be erase?
Anyone tested?
Erase VP and V6 tested?
With soic adapter or desolder EEPROM?
RE: VVDI PROG Support/Feedback Thread - daxxer - 23-04-2017
v4.5.7 (2017-04-21)
* This version DON't need update
firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.7
version in Doc folder
* Fix some MC68HC(9)08 read error
problem
* Fix PIC12F(16F) diagram error
problem
+ Add TC1762-CAN,
TC1766-CAN options
in <2-MCU>-><INFINEON-TRICORE>
+ Add STM8AF5179,
STM8AF5268, STM8AF5269, STM8AF5286, STM8AF5288, STM8AF5289, STM8AF528A, STM8AF52A6, STM8AF52A8, STM8AF52A9, STM8AF52AA, STM8AF6168, STM8AF6213, STM8AF6223, STM8AF6223A, STM8AF6246, STM8AF6248, STM8AF6266, STM8AF6268, STM8AF6269, STM8AF6286, STM8AF6288, STM8AF6289, STM8AF628A, STM8AF62A6, STM8AF62A8, STM8AF62A9, STM8AF62AA, STM8AL3136, STM8AL3138, STM8AL3146, STM8AL3148, STM8AL3166, STM8AL3168, STM8AL3188, STM8AL3189, STM8AL318A, STM8AL31E88, STM8AL31E89, STM8AL31E8A, STM8AL3LE88, STM8AL3LE89, STM8AL3LE8A, STM8AL3L46, STM8AL3L48, STM8AL3L66, STM8AL3L68, STM8AL3L88, STM8AL3L89, STM8AL3L8A, STM8L051F3, STM8L052C6, STM8L052R8, STM8L101F1, STM8L101F2, STM8L101F3, STM8L101G2, STM8L101G3, STM8L101K3, STM8L151C2, STM8L151C3, STM8L151C4, STM8L151C6, STM8L151C8, STM8L151F2, STM8L151F3, STM8L151G2, STM8L151G3, STM8L151G4, STM8L151G6, STM8L151K2, STM8L151K3, STM8L151K4, STM8L151K6, STM8L151M8, STM8L151R6, STM8L151R8, STM8L152C4, STM8L152C6, STM8L152C8, STM8L152K4, STM8L152K6, STM8L152K8, STM8L152M8, STM8L152R6, STM8L152R8, STM8L162R8, STM8L162M8, STM8S003F3, STM8S003K3, STM8S003C6, STM8S003K6, STM8S007C8, STM8S103F2, STM8S103F3, STM8S103K3, STM8L105C4, STM8L105C6, STM8L105K4, STM8L105K6, STM8L105S4, STM8L105S6, STM8S207C6, STM8S207CB, STM8S207K6, STM8S207K8, STM8S207M8, STM8S207MB, STM8S207R6, STM8S207R8, STM8S207RB, STM8S207S6, STM8S207S8, STM8S208C6, STM8S208C8, STM8S208MB, STM8S208R8, STM8S208RB, STM8S903F, STM8S903K options
in <2-MCU>-><ST-STM8>
+ Add ME17.9.11.1(TC1762) option
in <3-ECU>-><KIA>
+ Add MED17.1(TC1766) option
in <3-ECU>-><VOLKSWAGEN>
+ Add EIS-W639(1J35D),
EIS-W639(3K85K),
EIS-W639(4J74Y) options
in <4-IMMOBILIZER>-><BENZ>
+ Add JIEFANG-J6-HCS300 option
in <4-IMMOBILIZER>-><FAW>
* Change JIEFANG-J6-BCM option
(Support up to 5 remotes)
+ Add SENOVA-D60 option
in <5-DASHBORAD>-><BAICMOTOR>
+ Add EADO option
in <5-DASHBORAD>-><CHANGAN>
+ Add TRUMPCHI-GS4 option
in <5-DASHBORAD>-><GACMOTOR>
RE: VVDI PROG Support/Feedback Thread - ixot - 25-04-2017
Hi.
Please help me.
Please write to step by step.. CAS4 cloning procedure.. (if possible) I have two cas4, ori and donor.. I need cloning.. I have VVDI programmer..
Best Regards!
RE: VVDI PROG Support/Feedback Thread - louis21 - 26-04-2017
(25-04-2017, 20:51 PM)ixot Wrote: Hi.Hi,please go to VVDI Prog,the detailed options please refer to the picture attached.Read the EEPROM and FLASH then Save.then write it into the another CAS 4.Hope that can help you.
Please help me.
Please write to step by step.. CAS4 cloning procedure.. (if possible) I have two cas4, ori and donor.. I need cloning.. I have VVDI programmer..
Best Regards!
RE: VVDI PROG Support/Feedback Thread - Czozen - 28-04-2017
(21-04-2017, 07:34 AM)bmw335coding Wrote: ALL 35080 chips can be erase?
Anyone tested?
Erase VP and V6 tested?
With soic adapter or desolder EEPROM?
None of M35080 works
do not even read it correctly.080D0WQ/160D0WQ/160D0WT work Ok but in WQ/WT to erase you need to set voltage to 5.2V !
When it is set to 4.2V output voltage is 3.6V only.
VVDI PROG Support/Feedback Thread - bmw335coding - 01-05-2017
(28-04-2017, 20:57 PM)Czozen Wrote:(21-04-2017, 07:34 AM)bmw335coding Wrote: ALL 35080 chips can be erase?
Anyone tested?
Erase VP and V6 tested?
With soic adapter or desolder EEPROM?
None of M35080 works
080D0WQ/160D0WQ/160D0WT work Ok but in WQ/WT to erase you need to set voltage to 5.2V !
When it is set to 4.2V output voltage is 3.6V only.
You test it in SOIC (on board) or in EEPROM socket?